Dmx Control Mode - Stagg FlatPar 4 User Manual

SLav – In this menu, you can select the master/slave mode.
1. Press the MENU button. Then press the UP or DOWN button until "SLav" is
displayed. Then, press ENTER.
2. The screen displays "Sla": the slave mode is confirmed. It can be controlled by
the auto mode, sound mode and chase mode.
uer – This will display the software version.
1. Press the MENU button. Then press the UP or DOWN button until "uer" is
displayed. Then press ENTER.
2. The software version will be showed.

DMX control mode

4 DMX channels mode:
Channel Value
CH 1 0--255
CH 2 0--255
CH 3 0--255
CH 4 0--255
6 DMX channels mode:
Channel Value
CH 1 0--255
CH 2 0--255
CH 3 0--255
CH 4 0--255
CH 5 0--255
CH 6 0--255
10 DMX channels mode:
Channel Value
Function
Red (0%--100%)
Green (0%--100%)
Blue (0%--100%)
White (0%--100%)
Function
LED function
LED function speed and flash speed
Red (0%--100%)
Green (0%--100%)
Blue (0%--100%)
White (0%--100%)
Function