Download Print this page
Argos Home Capella 255/7276 Assembly Instructions Manual

Argos Home Capella 255/7276 Assembly Instructions Manual

3 drawer 3 door robe

Advertisement

Quick Links

Capella - 3 Drawer 3 Door Robe
Assembly Instructions -
Dimensions
Width - 115cm
Depth - 49cm
Height - 181cm
Important -
Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Please keep for future reference
255/7276
257/9838
239/2682
258/4517
MADE IN
BRITAIN
Issue 5 - 23/04/14

Advertisement

loading
Need help?

Need help?

Do you have a question about the Capella 255/7276 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Argos Home Capella 255/7276

  • Page 1 Capella - 3 Drawer 3 Door Robe Assembly Instructions - 255/7276 Please keep for future reference 257/9838 239/2682 258/4517 Dimensions Width - 115cm Depth - 49cm MADE IN Height - 181cm BRITAIN Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800 Issue 5 - 23/04/14...
  • Page 2 Safety and Care Advice Important - Please read these instructions fully before starting assembly • Warning: This unit weighs • Make sure you have enough • We do not approximately 77kgs. space to layout the parts before recommend the Please lift with care. starting.
  • Page 3 If you have damaged or missing components, call the Components - Panels Customer Helpline: 08456 400800 quoting the reference numbers below Please check you have all the panels listed below Top/Base (D1018A) (1119 x 471mm) Plinth (D1024A) (1119 x 85mm) Left Side Right Side Long Divider...
  • Page 4 If you have damaged or missing components, call the Components - Fittings Customer Helpline: 08456 400800 quoting the reference numbers below Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.
  • Page 5 If you have damaged or missing components, call the Assembly Instructions Customer Helpline: 08456 400800 quoting the reference numbers below Step 1 Prepare the drawer fronts Screw 2 metal dowels into the holes shown on the back of each drawer front Note: Tighten the metal dowels up fully against...
  • Page 6 Assembly Instructions Step 4 Fit the drawer base Slide the drawer base down the grooves in the drawer sides and down into the groove in the small drawer front Step 5 Fit the drawer back Fit the drawer back . between the drawer sides Make sure that the...
  • Page 7 Assembly Instructions Step 8 Prepare the long divider Place 3 runners the long divider . Slide Finished back the top of the front edge runner and use the 1st hole from the front to fit the 1st screw Slide the runner back the other way and use the 3rd hole from the back to fit the 2nd screw...
  • Page 8 Assembly Instructions Step 9 Join the long divider and fixed shelf Attach the fixed shelf to the long divider using 2 screws Finished front edge Finished front edge Step 10 Important: If one of the top/base panels has a plain chipboard surface this must be used as the base.
  • Page 9 Assembly Instructions Step 11 Fit top and base to the long divider Important: If one of the top/base panels has a plain chipboard surface Attach the top to the this must be used as the base. long divider using 2 screws Attach the base the long divider...
  • Page 10 Assembly Instructions Step 13 Fit the right side Push the right side onto the top base as shown. Use a screwdriver to tighten the 4 large locking nuts fitted to the top and base Profiled front edge of right side Note: Turn the large locking nuts as far as...
  • Page 11 Assembly Instructions Step 15 Fit the short divider Attach the short divider to the base using 2 screws Finished Attach the short divider top edge to the fixed shelf using 2 screws Finished front edge Step 16 Prepare the left side Important: The hinge plates used in this...
  • Page 12 Assembly Instructions Step 17 Plain chipboard Prepare the plinth surface Tap 2 wooden dowels into the plinth Insert 2 large locking nuts into the plinth Step 18 Fit the plinth Push the plinth onto the right side Use a screwdriver to tighten the large locking fitted to...
  • Page 13 Assembly Instructions Step 20 The measurement from top corner X to bottom corner X must be Fit the back panels equal to the measurement from top corner Y to bottom corner Y Square up the unit by making sure that measurement x to x equals y to y.
  • Page 14 Assembly Instructions Step 21 Fit the hanging rail and drawers Push the hanging rail into the rail holders fitted to the left side and long divider Starting with the bottom large drawer, slide both the runners forward and locate the drawer sides between them, lining up the holes in the drawer...
  • Page 15 Assembly Instructions Step 22 Fit the shelves Fit the shelves For each of the 3 For each of the 3 shelves shelves , insert 4 shelf , insert 4 shelf studs studs at the required at the required height. height. Lower the 3 shelves Lower the 3 shelves down onto the shelf...
  • Page 16 Assembly Instructions Step 24 Carefully choose the 2 holes you need to drill Drill the handle holes ONLY drill these in the centre door 2 holes in the centre door Important: Please follow these instructions DO NOT drill carefully. these holes Lay the centre door down onto a smooth surface.
  • Page 17 Assembly Instructions Step 26 Fit the outer doors and handles Note: The easiest way to attach each door to fit the top hinge first, then align and fit the other hinges. Push the hinge onto the front part of the hinge plate The recess at the bottom of screw B goes into the...
  • Page 18 Assembly Instructions Step 27 Fit the centre door and handle Note: The easiest way to attach the centre door is to fit the top hinge first, then align and fit the other hinges. Push the hinge onto the front part of the hinge plate The recess at the bottom of screw B goes into the...
  • Page 19 Assembly Instructions Step 28 Adjust the doors if needed Before adjusting the doors, use a spirit level to check the base (or top) of the unit is level, front-to-back and side-to-side in the 3 positions shown. Use suitable packing pieces (not supplied) to make the unit level BEFORE making any adjustment to the hinges,...
  • Page 20 Assembly Instructions Step 29 Fit the bracket To prevent possible overbalancing, we recommend that this unit is secured to a suitable wall by use of the bracket fitted to the top of the unit. Fixings are not supplied, as they will need to suit the wall type and the length of screw will depend on the distance...
  • Page 21 Capella - 3 Drawer 3 Door Robe Assembly Instructions - 255/7276 Please keep for future reference 257/9838 239/2682 258/4517 Dimensions Width - 115cm Depth - 49cm MADE IN Height - 181cm BRITAIN Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400800 Issue 7 - 16/01/15...
  • Page 22 Safety and Care Advice Important - Please read these instructions fully before starting assembly • Warning: This unit weighs • Make sure you have enough • We do not approximately 77kgs. space to layout the parts before recommend the Please lift with care. starting.
  • Page 23 If you have damaged or missing components, call the Components - Panels Customer Helpline: 03456 400800 quoting the reference numbers below Please check you have all the panels listed below Top/Base (D1018A) (1119 x 471mm) Plinth (D1024A) (1119 x 85mm) Left Side Right Side Long Divider...
  • Page 24 If you have damaged or missing components, call the Components - Fittings Customer Helpline: 03456 400800 quoting the reference numbers below Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.
  • Page 25 If you have damaged or missing components, call the Assembly Instructions Customer Helpline: 03456 400800 quoting the reference numbers below Step 1 Prepare the drawer fronts Screw 2 metal dowels into the holes shown on the back of each drawer front Note: Tighten the metal dowels up fully against...
  • Page 26: Table Of Contents

    Assembly Instructions Step 4 Fit the drawer base Slide the drawer base down the grooves in the drawer sides and down into the groove in the small drawer front Step 5 Fit the drawer back Fit the drawer back . between the drawer sides Make sure that the...
  • Page 27 Assembly Instructions Step 8 Prepare the long divider Place 3 runners the long divider . Slide Finished back the top of the front edge runner and use the 1st hole from the front to fit the 1st screw Slide the runner back the other way and use the 3rd hole from the back to fit the 2nd screw...
  • Page 28: Step 9

    Assembly Instructions Step 9 Join the long divider and fixed shelf Attach the fixed shelf to the long divider using 2 screws Finished front edge Finished front edge Step 10 Important: If one of the top/base panels has a plain chipboard surface this must be used as the base.
  • Page 29 Assembly Instructions Step 11 Fit top and base to the long divider Important: If one of the top/base panels has a plain chipboard surface Attach the top to the this must be used as the base. long divider using 2 screws Attach the base the long divider...
  • Page 30 Assembly Instructions Step 13 Fit the right side Push the right side onto the top base as shown. Use a screwdriver to tighten the 4 large locking nuts fitted to the top and base Profiled front edge of right side Note: Turn the large locking nuts as far as...
  • Page 31 Assembly Instructions Step 15 Fit the short divider Attach the short divider to the base using 2 screws Finished Attach the short divider top edge to the fixed shelf using 2 screws Finished front edge Step 16 Prepare the left side Important: The hinge plates used in this...
  • Page 32 Assembly Instructions Step 17 Plain chipboard Prepare the plinth surface Tap 2 wooden dowels into the plinth Insert 2 large locking nuts into the plinth Step 18 Fit the plinth Push the plinth onto the right side Use a screwdriver to tighten the large locking fitted to...
  • Page 33: Make Sure That The 2

    Assembly Instructions Step 20 The measurement from top corner X to bottom corner X must be Fit the back panels equal to the measurement from top corner Y to bottom corner Y Square up the unit by making sure that measurement x to x equals y to y.
  • Page 34 Assembly Instructions Step 21 Fit the hanging rail and drawers Push the hanging rail into the rail holders fitted to the left side and long divider Starting with the bottom large drawer, slide both the runners forward and locate the drawer sides between them, lining up the holes in the drawer...
  • Page 35 Assembly Instructions Step 22 Fit the shelves Fit the shelves For each of the 3 For each of the 3 shelves shelves , insert 4 shelf , insert 4 shelf studs studs at the required at the required height. height. Lower the 3 shelves Lower the 3 shelves down onto the shelf...
  • Page 36 Assembly Instructions Step 24 Carefully choose the 2 holes you need to drill Drill the handle holes ONLY drill these in the centre door 2 holes in the centre door Important: Please follow these instructions DO NOT drill carefully. these holes Lay the centre door down onto a smooth surface.
  • Page 37: Attach A Handle P

    Assembly Instructions Step 26 Fit the outer doors and handles Note: The easiest way to attach each door to fit the top hinge first, then align and fit the other hinges. Push the hinge onto the front part of the hinge plate The recess at the bottom of screw B goes into the...
  • Page 38 Assembly Instructions Step 27 Fit the centre door and handle Note: The easiest way to attach the centre door is to fit the top hinge first, then align and fit the other hinges. Push the hinge onto the front part of the hinge plate The recess at the bottom of screw B goes into the...
  • Page 39 Assembly Instructions Step 28 Adjust the doors if needed Before adjusting the doors, use a spirit level to check the base (or top) of the unit is level, front-to-back and side-to-side in the 3 positions shown. Use suitable packing pieces (not supplied) to make the unit level BEFORE making any adjustment to the hinges,...
  • Page 40 Assembly Instructions Step 29 Fit the overbalance protector kit Screw To prevent possible Washer Wall fixing overbalancing we Strap (not supplied) recommend that this unit Strap is secured to a suitable Washer wall by fitting of the overbalance protector kit Screw (not supplied) to the unit, or an...

This manual is also suitable for:

Capella 239/2682Capella 257/9838Capella 258/4517