Usb-A Connector Usb2/Usb3; Usb-A Connector Usb4/Usb5; Function Test - HP Pro 7 Series Maintenance And Service Manual

Solder the new component

USB-A connector USB2/USB3

Repair the USB-A connector:
1) Use a soldering iron and a de-soldering pump to remove as much solder as possible from the pin.
2) Lift the USB-A connector from the PCB.
3) Place the new component on the PCB. Be sure that it matches the PCB footprint.
4) Solder the new component.

USB-A connector USB4/USB5

Repair the USB-A connector:
1) Use a soldering iron and a de-soldering pump to remove as much solder as possible from the pin.
2) Lift the USB-A connector from the PCB.
3) Place the new component on the PCB. Be sure that it matches the PCB footprint.
4) Solder the new component.

Function test

After repair, be sure to confirm that all functions are working.
19