Video Recording - Philips VideoTracer VTR8300 User Manual

5 Video Recording

When you use the recorder for the fi rst time, please pay
attention to the requirements in this section!
(1)In the camera preview mode, press the "Video Recording"
button to start video recording, and the status indicator
will flash in red.
(2)Hold down the " " or "
in/zoom-out preview screen and realize the digital zooming
function.
(3)During video recording at night or in a dark environment,
if infrared switching is manual, hold down the "Audio
Recording" button, the infrared lamp will turn on, the
device will enter the night vision video recording mode,
and the screen color will be monochrome.
(4) During video recording at night or in a dark environment,
hold down the "Video Recording" button. The illumination
lamp will turn on as a supplementary light source.
(5)Press the "Camera" button to capture the current video
recording screen.
(6) Hold down the "Camera" button to mark the file as an
important file; when the cyclic video recording is turned
on, this file will not be deleted.
(7) Press the "Audio Recording" button, the device will switch
to the audio recording mode for audio recording.
(8) Press the "Video Recording" button again to end video
" button to enter the zoom-
recording. The device will vibrate briefly, the red indicator
will go out, the device will return to the camera preview
mode screen, and the status indicator will be illuminated
in green.
Recording Interface Illustration:
1
Battery indicator
3
Residual card capacity
5
Watermark
7
Recording resolution
9
Current date of system
11
Recording mode
2
Card icon
4
Video recording icon
6
ID No. watermark
8
Video recording duration
10
Current time of system
EN 43