Page 34
Content 7 Voice Recording 1 Welcome 8 One-click Playback Mode 1.1 Product features 9 Video Mode 2 Important Notice 9.1 Video playing 2.1 Safety 2.2 Hearing protection 2.3 Legal restriction on recording 10 Photo Mode 2.4 Install antenna 11 Audio Mode 3 Your Audio/Video Recorder 11.1 Voice play 3.1 What's in the box:...
Page 35
14 Mounting of Shoulder Clip 15 Wearing Shoulder Clip 16 Frequently Asked Questions (FAQ) 16.1 Failure to start the recorder 16.2 Incorrect time/date 16.3 Unclear image 16.4 Failure to record audio/video 16.5 Recorder is unable to play audio or video files 16.6 Failure to record audio/video 17 Technical Parameter 17.1 Memory...
• On-Screen Display function ensures that all videos and photos contain un-editable timing, product serial number Welcome to the world of Philips! We are honored by your and user serial number that ensure the legal validity of choice and purchase of Philips’ products. You can have Philips’...
2 Important Notice • Please do not turn the volume up beyond your tolerance. • Do not turn up the volume so high that you cannot hear what’s around you. • Be careful or suspend the use of headphones in hazardous 2.1 Safety situations.
2.4 Install antenna Notice • Under the condition that the antenna is tight and not To order to facilitate packaging and transportation, the inter- loose, it does no need to be twisted all the time to avoid phone antenna of the audio recorder is placed separately. The damage.
Reminder seconds, and the device will be turned on immediately, show- ing the Philips logo, as shown below: • The device is powered by the built-in lithium battery; if the device is not to be used for a long time, hold down the Turn On/Off button for 3s to shut down the device.
automatically be recognized as a portable device. The icon 4.2 Charging methods when the device is connecting to the computer is as shown below. (1)During shutdown mode, use USB data cable and the connector to charge the device. The device indicator will show green light first during charging, which will be extinguished after the device is fully charged.
5 Video Recording recording. The device will vibrate briefly, the red indicator will go out, the device will return to the camera preview mode screen, and the status indicator will be illuminated in green. When you use the recorder for the fi rst time, please pay attention to the requirements in this section! (1)In the camera preview mode, press the “Video Recording”...
6 Camera Notice • When the battery icon is showing empty, it means low on battery. The system will shut down automatically When you use the device for photo taking for the first time, at low power. If users are recording, the system will please read the instructions in this section! In the camera automatically save the recorded files and then shut down.
7 Voice Recording When users use the device for audio recording for the fi rst time, please read the instructions in this section! (1)Press the “Audio Recording” button in the camera preview Recording state mode to start audio recording; the operating status Current recording duration indicator will flash in yellow;...
8 One-click Playback Mode In the camera preview mode, press the “ ” button after the video record is saved, and the device will play the video file that users have just recorded directly. Press the “ ” button after the audio record is saved, and the device will play the audio file that users have just recorded directly.
9 Video Mode Interface illustration of recorded fi le playing: In the camera preview mode screen, users can use the“ ” button to enter the search and playback screen, press the “ ”or“ ”button to select a video option, and then press the Menu button to enter the video fi le list screen.
Page 48
again to resume play from the previous position. (5)Press“ ”or “ ” button during play to fast reverse or fast forward the fi le being played at 2X, 4X, 8X, 16X, 32X or 64X. (6)Hold down the “Camera” button to mark the currently selected file as an important file;...
10 Photo Mode fi le; when the cyclic video recording is turned on, this fi le will not be overridden. This fi le can be deleted only when the computer is connected. In the camera preview mode screen, users can use the “ ” button to enter the search and playback screen, press the “...
11 Audio Mode In the camera preview mode screen, users can use the Menu button to enter the search and playback screen, press button to select an audio recording play- “ ” “ ” back option, and then press the Menu button to enter the audio fi le list screen.
11.1 Voice play (1)Press‘ ’ or ‘ ’button to select the file you want to play. (2) Press the Menu button to start play, and the operating status indicator will be illuminated in green. (3)Hold down the Menu button to end playing. And return to the audio file list screen.
12 Interphone The device has an independent interphone function. The channel, subsonic code, etc. of the interphone are set in the device; when the device is turned off, voice intercommunica- tion is still possible. 12.1 Interphone function switch Turn the interphone switch toward the antenna, and the 12.2 Interphone setting interphone will give a prompt tone, indicating that the interphone has been turned on.
Page 53
Reminder • When the red indicator of the interphone is flashing, it means that the interphone has low power. Please charge it in time. If you want to continue to use the device for recording under low power condition, please turn off the interphone first.
13 Setting Mode 13.1 Interphone setting The device has an independent interphone function. When the interphone is turned off , the options in the interphone setting bar will become gray and cannot be set; they can be set only if the interphone is turned on. The interphone setting menu bar includes public channel, long-distance channel, subsonic code, timeout timer and 13.1.2 Far distance...
13.1.3 Subsonic code 13.1.5 Squelch level Subsonic is used mainly to turn on squelch to both im- Although squelch is intended to inhibit noise strictly, over-in- prove sensitivity, and avoid interference and noise. After hibition may prevent weak communication signals from being the subsonic code is turned on, only if the sender and the received.
13.2.1 Audio recording type The audio recording type has two options: HQ and SLP. When audio recording has reached one hour, the device will save the audio fi le automatically, and then begin to record the next audio. The reference screen is as shown below: 13.3 Video recording setting The video recording setting menu bar includes resolution, video quality, video pre-recording and video delayed record-...
appropriate resolution, then press the Menu button for con- and on. Press the button for selection, then “ ” “ ” fi rmation, and hold down the Menu button to return to the press the Menu button for confi rmation and hold down the previous menu.
Page 58
13.4.1 Photo size 13.4.3 Continuous shooting 10 photo sizes are available: 32M, 23M, 20M, 18M, 16M, 14M, Continuous shooting means that the device can take photos 12M, 8M, 5M and 3M. Press the button to continuously when the Camera button is pressed once in the “...
to the previous menu. 13.5.2 System format The system format, also known as the television broadcasting 13.5 System setting format, can be either NTSC or PAL. When the device out- The system setting menu bar includes language, system puts as television, the right option should be selected based format, default settings, screen brightness, system time, au- on the format of the television set.
Page 60
In this screen, hold down to return to the previous “ ” menu, and press the “ ” or “ ” button to adjust the value 13.5.7 Automatic screen off of the corresponding position. Press to select the year, month, date, hour and min- “...
Page 61
30min. During video recording, a segmented video fi le will be 13.5.9 Cyclic video recording saved for the set time, and the recording of the next video fi le will begin seamlessly. The reference segmented video In the video recording setting menu, select the “Cyclic Video recording screen is as shown below: Recording”...
Page 62
priate value, and then press the Menu button for confi rma- 13.5.14 Infrared switching tion. In the system setting menu, press the “ ” or “ ” button 13.5.17 ID No. to select the “Infrared” menu, and then press the Menu button to enter the infrared switching menu.
Page 63
Gross storage capacity: View the memory information. Usable space: View the remaining space information. Usable video recording time: View the video recording time for the current video recording resolution. Usable audio recording time: View the audio recording time for the current audio recording type. Battery power: View the current battery power information.
14 Mounting of Shoulder Clip To mount the jacket, insert the R position of the jacket insert into the slot of the device, and push the jacket slowly until the insert reaches the bottom of the slot. As shown below: 14.2 Dismounting of clip To remove the jacket, hold the jacket and the device while supporting the insert, and pull it gently.
15 Wearing Shoulder Clip (1)Press the hand clip to open the clip, and then clamp toward the shoulder strap so that the hook catches the root of the shoulder strap. (2)Unleash the hand clamp to clip the shoulder clamp and adjust the device to an appropriate position.
If such issues persist, please consult our dealers or visit our official website: www.philips.com/support Please recharge the battery as it has run out of power. 16.6 Failure to record audio/video 16.1 Failure to start the recorder...