Video Recording - Philips VideoTracer VTR8202 User Manual

5 Video Recording

When you use the recorder for the fi rst time, please pay
attention to the requirements in this section!
(1)On the Preview interface, press the "Video Record"
button to start recording and the state indicator flickers
red.
(2)Short press the recording button to end the recording, the
red indicator will go off, and return to the camera preview
interface. The status indicator will be become green.
(3)Long press" "or " " on the preview interface to
zoom out or in on the preview interface for digital zoom.
(4) When recording at night, in a low light environment or of
the infrared is in manual mode, please long press the "IR"
button to change to night recording mode. The screen will
become black/white. Long press the recording button and
the additional light will be turned on to supplement the
light source.
(5) Press the "Photo" button to capture the current recording
screen.
(6) Short press the "Star" button during video recording. The
file will be marked as important file, and the marked file
will not be deleted when the loop video files are turned
up.
(7) The reference video recording interface is shown below:
Recording Interface Illustration
5
1
2
3
4
1 Recording resolution
2 Video recording
3 ID watermark
4 System current date and time
6
7
5 Recording mode
6 Battery
7 Remaining card capacity
EN 43