Voice Recording - Philips VideoTracer VTR8300 User Manual

7 Voice Recording

When users use the device for audio recording for the fi rst
time, please read the instructions in this section!
(1)Press the "Audio Recording" button in the camera preview
mode to start audio recording; the operating status
indicator will flash in yellow; please align the built-in
microphone with the sound source.
(2) Hold down the "Camera" button to mark the file as an
important file; when the cyclic video recording is turned
on, this file will not be deleted.
(3) Press the "Video Recording" button. The device will
switch to the video recording mode for video recording.
(4) Press the "Audio Recording" button to end audio
recording, and return to the preview screen.
The reference audio recording interface is shown below:
Audio Recording Illustration:
1
Recording state
2
Current recording duration
3
Battery indicator
Reminder
• Before audio recording, set the required audio recording
sensitivity.
• P l e a s e d e l e t e s o m e u n n e c e s s a r y f i l e s b e fo re
recording.
• Please first test audio recording to see if the device is set
properly.
• Do not pull out the memory card during the audio/video
recording mode. Otherwise, damage might be caused to
the files.
• Do not cut off power during audio/video recording
mode. Otherwise, the damage might be caused to the
recorder and the files might be lost or damaged.
• If users intend to use the device for a long period of
time, please charge the device before recording.
EN 45