Page 45
Content 7 Voice Recording 1 Welcome 8 Video Mode 1.1 Product Features 8.1 Video Playing 2 Important Notice 9 Photo Mode 2.1 Safety 2.2 Hearing Protection 2.3 Legal Restriction on Recording 10 Audio Mode 2.4 Background Data 2.5 Icons Used 11 Text Mode 3 Your Audio/Video Recorder 12 Group Chat Function...
Page 46
14.2 Video Pre-Recording 18 Wearing Shoulder Clip 14.3 Delayed Recording 14.4 Recording Resolution 14.5 Automatic Recording upon Start 19 FAQ 14.6 Night Vision Mode 14.7 Recycling Storage Failure to start the recorder 14.8 Photo Resolution Incorrect time/date 14.9 Continuous Shooting Unclear image Failure to record audio/video Recorder is unable to play audio or video files...
• 160° super-wide angle lens to get a fuller picture. • Use dual filter switch to prevent color cast during daytime Welcome to the World of Philips! We feel delighted that you and more clarity during nighttime. choose to buy from Philips. You can always visit our website •...
2 Important Notice • Special warning: Do not adjust the volume beyond the allowable capacity of your ears. • Do not adjust volume to a level higher than the ambient volume. 2.1 Safety • Stop or suspend the use of your earphone in case of dangers.
a one-year warranty. If you require our services after Warning expiration of the warranty, please call 400-800-7890. • The background system only keeps audio/video data for • This icon warns you about personal injury. In case of only 7 days. Please make backup copies to prevent data inappropriate operation, damage might be caused to your loss to which the Company shall not be held liable.
2 hours! During shutdown mode, long press Turn ON button, and the device will be turned on, showing the Philips logo, as shown Press Return button to return to the Main Interface which below:...
Reminder Reminder • The device uses undetachable lithium batteries. If the • The device can be charged either during ON or OFF device is left unused for a long time, please long press mode. Normally, during OFF mode charging, it takes “ON/OFF”...
5 Video Recording When you use the recorder for the first time, please pay attention to the requirements in this section! (1)During Video Recording mode, click “Video Recording” button to record and the indicator light will show red light. (2)Click “+” or “-“ on the screen to zoom in. The maximum capacity is 10x.
Page 54
Video Recording Time Notice WIFI 4G Network • When the battery icon is showing empty, it means low on Signal Status battery. If you are recording, the system will automatically Battery Status save the recorded files. In case of low battery, please System Time charge your device timely.
6 Photo When you use the device for photo taking for the first time, please read the instructions in this section! During the video recording mode, press the Photo Taking button and a “ding-ding” sound will occur during photo taking. In dark or dim light, you need to turn on the infrared light for photo taking.
7 Voice Recording When you use the device for audio recording for the first time, please read the instructions in this section! (1)Press “Voice Recording Button”or click the audio recording icon to start recording. The indicator will show green light during work mode. Please adjust the imbedded mic to the sound source.
Page 57
Reminder • Please delete some unnecessary files before recording. • Do not pull out the memory card during audio/video recording mode. Otherwise, damage might be caused to the files. • Do not cut off power during audio/video recording mode. Otherwise, damage might be caused to the recorder and the files might be lost or damaged.
8 Video Mode Click the Replay icon in the main menu or the replay icon during preview mode to enter the video file list as shown below: Click the file you want to play and click “ ” “ ” change the file being played.
Recorded File Playing Illustration 8.1 Video Playing (1)Click button during play mode to change “ ” “ ” the file being played. (2)Click Play button on the screen to start playing and the indicator will show green light during working mode. (3)During playing mode, click Pause to suspend playing.
9 Photo Mode Click the File Replay icon in the main menu or the file Replay icon under preview mode to enter the photo list as shown below: Click the photo for viewing and click “ ” “ ” choosing the photos. Photo Replay Interface...
10 Audio Mode Click the File Replay icon in the main menu or the File Replay icon in the preview mode to enter the audio file list as shown below: Click the file for playing, click Pause to stop playing and press 4G button to return to the playlist.
Page 62
Audio File Playing Interface Illustration: Play Progress Bar Current Play Time File name Total Time Pause Reminder • When the earphone is inserted, the speaker of the device will be shut down.
11 Text Mode Click the File Replay icon in the main menu or the File Replay icon in the preview mode to enter the text file list as shown below: The reference text interface is shown below:...
12 Group Chat Function 12.1 Login (2)Set the parameters, click Settings and enter relevant information. (1)Click the desk icon to enter the group chat interface and press PTT button to go to the login page. • Server: default address: 4g.szgps.net. •...
• Data port: enter the data interaction port, default: 80. 12.2 Group Chat Function • After entering information, click “Confirm”. (3)User Login (1)Initiate a Group Chat Through the terminal you can initiate a group chat with the steps shown below: •...
Page 66
• Select Channel • Click the upper right icon and enter the group chat • Choose group members. initiation interface as shown below: • Create a group name.
Page 67
the PTT button on the left side of the recorder to talk to other members. • The number shows the number of people in the talk mode. • "Idle" means no one is in talk mode. • After confirming group type and members, click “OK” and the group naming interface will appear as below: (3)To end talk mode, release the round-shaped circle or release the PTT button on the recorder.
Page 68
(4)Member Status • ONLINE means the user is in the voice chat group. Click icon to check the status of group members, in • Background Online means the user has logged in but has order to initiate voice chat, video chat or text messages. not entered the voice chat group.
two or more of the contacts in the contacts list or the talking contacts list, click the voice button in the bottom and invite others to enter the voice chat. Initiate a temporary voice chat in the fixed talk groups: After answering the calls, the interface is shown below.
center, initiate a video call and the command center will automatically answers the call. 12.4 Contacts In the Contacts, you can see all the members. • Click Real-Time Transmission and the interface below appears. Click the Contacts icon, and the Contacts interface props up. •...
Page 71
In the Contacts, you can view the basic information and sta- Enter the number of the member in the dial page, click tus of the members. You can also initiate a voice call, a video to initiate a voice chat, click to initiate a video chat and call or a text message with other members to view such click...
audio, text, picture, location and video messages. (2)Real-Time Two-Way Video Chat Choose one member from the Contacts List or the voice char group, and click to initiate a video call. During video call, the camera can be switched. By default the Hands Free mode is initiated for any video call.
13 GPS Positioning The device supports GPS function and Beidou dual-mode po- sitioning. The longitude and latitude are shown on the screen to produce a real-time location file. The tracking record can be obtained at the dispatcher. Before use you need to start the GPS function in the menu first.
14 Video Setting video recording duration. The options include shutdown, 10s, 15s, 20s, 30s and 60s. You can slide on the screen to what the option you want. Click the screen setting icon in the preview mode and the system enters video recording setting menu, including 14.4 Recording Resolution segment recording, pre-recording, recording resolution, auto- matic recording upon start, night vision recording, recycling...
you want to continue recording, the new recorded clips will cover the existing clips. 14.8 Photo Resolution The resolution options include low, medium and high, which can meet most of your needs under various scenarios. For the same number of photos, the high resolution photos will take up more internal storage.
15 Platform Setting 15.1 Location Reporting (1)Reporting Status Click the screen platform setting icon in the main menu Click this option to enter the sub-menu to turn on or off the and the system enters the Platform Setting page, including Location Reporting function.
(3)Code Rate 15.3 General Setting The higher the code rate, the better the video quality and the higher the power and data consumption. The user can (1)Automatic Answering choose to click the white box to set the code rate according Whenever there is an incoming call, the device answers to real uplink broadband and resolution.
15.5 Quick SOS In case of any emergency, you can share your real-time video and location to the command center. The Command Center can view the video and location of the patrol person. The other mobile devices within the same group will also receive the preset text messages regarding this SOS.
16 System Setting (2)Date/Time Setting After entering the password, you can change the system date and time. The default password is 123456. (3)Language Setting The system setting menu includes: system, media, device In the Menu, please choose one language as the system and network.
16.2 Media 16.3 Device In the Device menu you can activate the Power saving setting as shown below: (1)Brightness When you want to use this function, you can adjust the brightness of the screen. The setting includes five levels and you can press “+”or “-”...
shift to the cellular network. Before using cellular network 16.4 Network for downloading large-sized files, you will get a warning. (4)Location Setting When using this function, you can apply for using the location information. (5)Bluetooth Setting After you initiated Bluetooth, the device can communicate with the nearby devices with Bluetooth function.
17 Mounting of Shoulder Clip 17.1 Mounting of Shoulder Clip Adjust the clip and the slot of the device: (1) to make them face each other; (2) to insert the clip according to the arrow below: 17.2 Dismounting of clip When dismounting the clip, pull the clip upward and drag it out in the opposite direction.
18 Wearing Shoulder Clip (1)Press the hand clamp to make it open and insert the shoulder clamp. (2)Unleash the hand clamp to clip the shoulder clamp and adjust the device to an appropriate position.
If such issues persist, please consult our dealers or visit our The batter is used up, please charge your device. official website: www.philips.com/support. How to respond to recorder failure Failure to start the recorder If you are unable to start the device, face black screen and The batter has run out and you need to charge your device.