Start To Use; Turn On/Off - Philips VideoTracer VTR8300 User Manual

4 Start to Use

4.1 Turn on/off

Notice
• Please charge the device in the shutdown mode for three
hours before using it for the first time!
During shutdown mode, hold down Turn ON button for 3
seconds, and the device will be turned on immediately, show-
ing the Philips logo, as shown below:
The device then enters the preview screen, as shown below;
in the preview mode, the operating status indicator will be il-
luminated in green. Press the "
the device will return to the setting screen. In the preview
button on this screen, and
"
screen, hold down the " or " "" button to enter the
"
zoom-in/zoom-out and realize the digital zooming function.
Reminder
• The device is powered by the built-in lithium battery; if
the device is not to be used for a long time, hold down
the Turn On/Off button for 3s to shut down the device.
• If the recorder does not work properly, please check if
the device is out of power.
• During operation please do not pull out the external
memory card. Otherwise, damage might be caused to
the files or the device.
• When the battery indicator "
charge the device promptly.
" is displayed, please
EN 41