Video Recording - Philips VideoTracer VTR8101 User Manual

5 Video Recording

When you use the recorder for the first time, please pay
attention to the requirements in this section!
(1)In the camera preview state, push the Video button up to
start the video recording. The device makes the sound of
'tick' and the status indicator will flash in red.
(2)Pull the Video button down to end the recording. The
device 'tick' for two times, the red indicator light goes out,
the device returns to the camera preview interface, and
the status indicator lights up in green.
(3)Long press' ' or '
in or out on the preview interface for digital zoom.
(4) When recording in dark or dim light, long press Recording
Button to turn on the illumination light.
(5) Press the 'Photo' button to capture the current recording
screen.
(6) Long press the photo button during video recording. The
file will be marked as important file, and the marked file
will not be deleted when the loop video files are turned
up.
(7) The reference video recording interface is shown below:
34 EN
' on the preview interface to zoom
Recording Interface Illustration
1
Recording resolution
3
System current date and time
5
Recording mode
7
Battery
9
Remaining card capacity
2
Video icon
4
ID watermark
6
Video duration
8
System time
10
Card icon