SP01 PARISI Assembly Instructions Manual

PARISI

ASSEMBLY INSTRUCTIONS

Table of Contents

Need help?

Do you have a question about the PARISI and is the answer not in the manual?

Page 1 PARISI DESIGNED BY TOM FEREDAY ASSEMBLY INSTRUCTIONS...
Page 2 DISCLAIMER ENSURE THAT ALL STEPS ARE FOLLOWED IN THE CORRECT ORDER AND THAT NO STEP IS LEFT OUT. A MINIMUM OF TWO PEOPLE ARE REQUIRED FOR ASSEMBLY. TO PREVENT ANY DAMAGE OF THE PRODUCT, DO NOT USE A BOX CUTTER, KNIFE OR SHARP OBJECT TO OPEN THE BOXES.
Page 4 THE FELT AND PLASTIC FEET ARE IN A BAG ATTACHED TO THE STRUCTURE. APPLY EITHER THE PLASTIC OR THE FELT FEET ONTO THE METAL FEET. WE RECCOMEND TO USE PLASTIC FEET FOR OUTDOOR AND FELT FEET FOR INDOOR. p. 4 © Copyright 2019 SP01 Design. All rights reserved.
Page 5 PLACE THE PLASTIC RUBBERS ON TOP OF THE METAL DISKS. MAKE SURE THAT THE HOLES ARE ALGINED. MAKE SURE THAT THE METAL STRUCTURE IS ON A FLAT SURFACE, OTHERWISE IT WILL BE DIFFICULT TO CENTRE THE HOLES FOR TOP ASSEMBLY. p. 5 © Copyright 2019 SP01 Design. All rights reserved.
Page 6 S P Ø 1 D E S I G N . C O M PARISI TABLE TOP DISASSEMBLY OPEN THE BOX WITH THE TOP; IF APPLICABLE, DETACH THE SCREWS INSERTED INTO THE TOP. p. 6 © Copyright 2019 SP01 Design. All rights reserved.
Page 7 TIGHTEN ALL THE SCREWS GRADUALLY MAKING SURE THAT EVERYTHING IS FIXED IN A UNIFORM MANNER. ATTENTION: THE WEIGHT OF THE TOP PLACED ONTO THE STRUCTURE CAN SLIGHTLY MOVE THE HOLE IN THE STRUCTURE. YOU CAN RECENTRE THE HOLES BY SLIGHTLY LIFTING THE TOP. p. 7 © Copyright 2019 SP01 Design. All rights reserved.