Advertisement
Table of Contents
Advertisement
Table of Contents
Related Manuals for SP01 HOLLAND CONSOLE
Summary of Contents for SP01 HOLLAND CONSOLE
- Page 1 HOLLAND CONSOLE DESIGNED BY METRICA ASSEMBLY INSTRUCTIONS...
- Page 2 DISCLAIMER ENSURE THAT ALL STEPS ARE FOLLOWED IN THE CORRECT ORDER AND THAT NO STEP IS LEFT OUT. A MINIMUM OF TWO PEOPLE ARE REQUIRED FOR ASSEMBLY. TO PREVENT ANY DAMAGE OF THE PRODUCT, DO NOT USE A BOX CUTTER, KNIFE OR SHARP OBJECT TO OPEN THE BOXES.
- Page 3 HOLLAND CONSOLE PACKAGING PARTS BOX WITH METAL BASE BOX WITH TOP METAL BASE WITH ALREADY TOP IN WOOD OR MARBLE ASSEMLBED FEET, 6 SCREWS AND WASHERS AND 8 FELT PADS p. 3 © Copyright 2019 SP01 Design. All rights reserved.
- Page 4 ENSURE THAT THE ADJUSTABLE FEET ARE NOT TOO TIGHT, IN CASE LOOSEN THEM A LITTLE BIT. IF YOU WISH TO HAVE CONTRASTING FEET, ENSURE TO CHANGE THE FEET. POSITION THE FELT PADS AS SHOWN ABOVE MAKING SURE THAT THE PADS DO NOT COVER ANY HOLE. p. 4 © Copyright 2019 SP01 Design. All rights reserved.
- Page 5 HOLLAND CONSOLE TOP ASSEMBLY REMOVE THE TOP FROM ITS PACAKGING AND PLACE IT UPSIDE DOWN ON A BLANKET/ SOFT AND CLEAN SURFACE WHICH WILL NOT SCRATCH OR DAMAGE THE TOP. p. 5 © Copyright 2019 SP01 Design. All rights reserved.
- Page 6 PLACE THE METAL BASE ONTO THE TOP. NOW INSERT THE SCREWS AND WASHERS FIXING THE STRUCTURE ONTO THE TOP USING THE PROVIDED ALLEN KEY. TIGHTEN ALL THE SCREWS AND PLACE THE DESK ON ITS LEGS. p. 6 © Copyright 2019 SP01 Design. All rights reserved.
- Page 7 S P Ø 1 D E S I G N . C O M HOLLAND CONSOLE p. 7 © Copyright 2019 SP01 Design. All rights reserved.
Need help?
Do you have a question about the HOLLAND CONSOLE and is the answer not in the manual?
Questions and answers