Installing The Batteries - FLIR BHS Series Operator's Manual

BHS-Series Bi-Ocular Operator's Manual
3–3
The batteries must be installed and charged before using your
camera.
1. Pull off the battery cover by
2. Install the batteries
3. Re-install the battery
If you have installed rechargeable batteries, they must be charged
before using the camera. Regular AA batteries may be used but will
only provide about one and a half hours of camera use.
431-BHS0-00-10, Revision 110
nd Quality Products Online at:

Installing the Batteries

lifting the latch as shown at
the right.
paying attention to
the positive and
negative markings, as
shown at the right.
cover by engaging the
hinge and snapping
the latch back in
place.
GlobalTestSupply
www.
3—Operating Your Camera
Battery
cover
latch
.com
11
sales@GlobalTestSupply.com