Pentair CARBON FILTRATION SYSTEM 1.0 Installation And Service Manual page 15

7. CYCLE 3 - FAST RINSE/BRINE REFILL
The control will display:
FILL/RNS: 3 min
• Press the UP or DOWN ARROW to change the length of the fast rinse. The setting range is 0 to 99 minutes
(maximum limit).
Notice
In most applications, this setting will not need adjusting.
Press the SCROLL BUTTON to advance to the next setting.
To Exit Press Down Arrow
Press the DOWN ARROW to exit the Installer's Level.
Notice
If you need to recheck settings or make a change, pressing SCROLL when "EXIT" is displayed will take you
back to the start of Installer Settings.
WARNING
To activate the new settings, you must execute a complete regeneration. If you DO NOT manually
regenerate the system, the settings WILL NOT become active until the unit has completed the next
scheduled regeneration.
15 • WHOLE HOUSE CARBON FILTRATION SYSTEM