Pentair CARBON FILTRATION SYSTEM 1.0 Installation And Service Manual page 12

• If you do not want to change the phone number, leave this setting at NO. Press SCROLL to advance
to the next setting.
• To change the number, select YES; Press the UP or DOWN ARROW and then enter the service phone
number. Press SCROLL to advance through the digits. After setting the number, press SCROLL to
advance to the next settings.
3. TIME OF DAY
The control will display:
Set Time of Day
• Press the UP or DOWN ARROW to program the time of day.
Press the SCROLL BUTTON to advance to the next setting.
The control will display:
Go to ADVANCED menu ? No
If you want to go to advanced setting, press the UP or DOWN ARROW, change to YES and press the
SCROLL BUTTON. (see ADVANCED MENU below)
If you do not want to access advance setting, leave this at NO. Press Scroll to advance to Exit screen.
To Exit Press Down Arrow
Press the DOWN ARROW to exit the Installer's Level.
Notice
If you need to recheck settings or make a change, pressing SCROLL when "EXIT" is displayed will take you
back to the start of Installer Settings.
WARNING
To activate the new settings, you must execute a complete regeneration. If you DO NOT manually
regenerate the system, the settings WILL NOT become active until the unit has completed the next
scheduled regeneration.
12 • WHOLE HOUSE CARBON FILTRATION SYSTEM