Pentair CARBON FILTRATION SYSTEM 1.0 Installation And Service Manual page 13

ADVANCED MENU
Notice
On WF10-P, WF8-P, WF6-P and WF4-P Iron & Sulfur Systems, you must use the advanced menu to set the
calendar override to 3 days. See step 4 for more details.
1. RESET AVERAGE
The control will display:
Reset Average No
• If you want to reset the average daily volume, press the UP or DOWN ARROW to select YES.
• If YES is selected, the control will reset the average volume per day to 25% of the capacity.
Press the SCROLL BUTTON to advance to the next setting.
2. RESERVE CAPACITY
The control will display:
Rsrv: Variable
• The reserve capacity will be calculated automatically, based on the daily water consumption. The initial
setting is 25% of the capacity, which will adjust over time to accurately reflect daily water use.
• If you prefer, you can select a Fixed Reserve. While at the Reserve screen when "Variable" is
flashing, press the UP or DOWN ARROW. The control will display:
Rsrv: 200 GL FXd
• To adjust the reserve, press the SCROLL BUTTON. Use the UP OR DOWN ARROW to set the reserve
capacity in increments to 10 gallons, upto 70% capacity of the bed.
• To calculate the reserve capacity, take the number of people in the home and multiply it by 70 gallons per
day. The reserve capacity will equal one day of water use.
Example: Three people X 70 gallons per day = 210 gallons (suggested reserve capacity)
Press the SCROLL BUTTON to advance to the next setting.
3. TIME OF REGENERATION
The control will display:
Regen @ 1:00 am
• Press the UP or DOWN ARROW to adjust the time of regeneration.
Regeneration should be set for a time when water use is minimal. 1:00 AM is good for most households.
Notice
The system diverts untreated water to the home during regeneration. If any water is drawn during
regeneration, some untreated water will enter the plumbing system and possibly the hot water tank.
Press the SCROLL BUTTON to advance to the next setting.
WHOLE HOUSE CARBON FILTRATION SYSTEM • 13