Canon BJ-10sx User Manual page 81

Epson LQ Mode
DIP switch 9
When this switch is OFF, the printer uses USA code page page 437.
When this switch is ON, the printer uses Multilingual code page 850.
Each code page has three character sets: Set 1, Set 2, and the All
Characters Chart. See Appendix C, Printer Mode Command Summaries
and Character Sets, for a sample of each character set.
DIP switch 10
When this switch is OFF, the printer emulates the IBM Proprinter
X24E. When this switch is ON, the printer emulates the Canon BJ-130e.
DIP switch 11
When this switch is OFF, the printer is in BJ-10e mode. When this
switch is ON, the printer is in Epson LQ mode.
When the printer is in Epson LQ mode (DIP switch 11 is ON), you can
set the DIP switches to control the following functions:
DIP switch Function
1 Automatic sheet feeder
2 Text scale mode
3 Automatic line feed (LF)
4 Page length
5 Character set
6, 7, 8 International character set See below
9, 10 Typeface
11 Printer control mode
DIP switch 1
If you install the optional sheet feeder, set this DIP switch ON.
OFF ON
Disable Enable
Disabled Enabled
Normal CR CR + LF
11 inches 12 inches
(279 mm) (305 mm)
Italics Graphics
See below
BJ-10e mode Epson LQ mode