Canon BJ-10sx User Manual page 29

Selecting Envelopes, Transparencies, or Thick Paper
1. Make sure you insert the paper so that the side on which you
want to print is facing away from you (toward the top cover). If
you are using a preprinted stock, such a s sheet of letterhead,
insert the top of the paper into the printer first.
2. Pres the LF/FF button. The printer automatically positions the
paper so it is ready for printing.
3. Press ON LINE and start your print operation.
Use commercial, number 10 envelopes, which are 9.5 by 4.125
inches (241 by 104 mm).
CAUTION: Some envelopes are not recommended since they
may cause jams or smears, or may damage your printer. Do not
use the following types of envelopes:
Envelopes with windows, metal clasps, holes,
perforations, cutouts, double flaps, or peel-off sealing
strips.
Envelopes that are specially coated or deeply embossed.
Envelopes with letters enclosed
Use transparencies that are intended for use with ink jet printers
only. For best results, use Canon's BJ transparency film #Q07-
0001-M1. You can also use CG3480 transparency film from
3M.
NOTE:
Always feed transparencies from the bottom slot on the
printer.
Use transparencies only in a normal operating
environment. High temperatures may damage a
transparency.
You can print on heavier-weight paper (up to 28 lbs or 105
g/m2).