Printing The Self Test - Canon BJ-10sx User Manual

Lights_____________________________
POWER
Blinks every
0.5 seconds
Problem: The optional battery pack is low.
Solution: Recharge the battery pack. (The battery pack is described in Chapter 9, Installing a
Options.)
ON
POWER ERROR Printer Alarm
LINE
Blinks Off On
every 0.5
seconds
Problem: The optional battery pack is fully discharged.
Solution: Recharge the battery pack. (The battery pack is described in Chapter 9, Installing a
Options.)
POWER ON LINE
Blinks Off
Problem: The optional battery pack is fully discharged.
Solution: Recharge the battery pack. (The battery back is described in Chapter 9, Installing a
Options.)

Printing the Self Test

ON LINE ERROR
Off Off
Beeps five times; after five minutes, the printer beeps again and then turn
ERROR
Blinks
If you have a problem with your printer that you cannot solve by
checking the indicator lights, try to print the self test as described in
Chapter 4, Using the Operator Panel. If you can print the self test, the
problem is not with the printer. Check the following:
1. Check the interface cable connection. Make sure you have
connected the correct interface cable to your computer and that
the connections are secure.
2. Make sure the computer is set up correctly for your printer.
3. Print a screen dump from your computer. If it does not print,
there is a problem with your software or the interface port. Call
the Canon Help desk at 1-800-423-2366.
Printer Alarm
None
Printer Alarm
Beeps five times