Hitachi VSP E590 Installing page 3

1. Attach stopper with three screws on the rear side of the rail. Repeat step for both rails.
Number
1
2
3
2. Insert pins on the front and back of the rail into the holes on the front and back of the rack and hold in place using
the rail clips. Repeat step for both sides.
3. Install the rear side of the rail with a washer and binding screw. Repeat step for both sides.
Number
1
https://knowledge.hitachivantara.com/Documents/Storage/VSP_E_Series/93-04-0x/Installation/Installing_your_VSP_E590_an...
Item
Stopper
Screws
Rail
Item
Pin
Updated: Thu, 06 Jan 2022 00:49:25 GMT
Powered by
3