Table of Contents
Advertisement
Make sure the storage system is connected to your production network.
Procedure
1. In the navigation tree of the maintenance utility, under Administration, click Alert Notifications. Then click Set Up in
the Alert Notifications pane on the right.
NoteAlthough a tab is provided for configuring email notifications, we recommend that you set up email
notifications using Hitachi Remote Ops monitoring system.
2. To configure the storage system to send notifications in syslog format, complete the settings in the Syslog tab.
Then open a firewall port on your network for transferring syslogs.
3. To configure the storage system to send notifications as SNMP traps, complete the settings in the SNMP tab.
4. Click Apply, and then click OK.
Step 7: Make host connections
Host attachment tasks include configuring ports and preparing the host hardware and software for connection to the
storage system. For information and instructions, see the host attachment preparation procedures in the Open-Systems
Host Attachment Guide. You will also find the following resources helpful:
• For the latest interoperability and compatibility information about supported hosts and host attachment hardware,
see the Hitachi Vantara
• For information about preparing your hosts for use with the storage system, see the documentation for the product.
Connecting Fibre Channel ports to hosts
Important Before connecting the storage system to a host, review the requirements and detailed instructions in the
Open-Systems Host Attachment Guide.
https://knowledge.hitachivantara.com/Documents/Storage/VSP_E_Series/93-04-0x/Installation/Installing_your_VSP_E590_an...
Interoperability
Reports.
Updated: Thu, 06 Jan 2022 00:49:25 GMT
Powered by
15
Hide quick links:
Advertisement
Table of Contents
