Setting The Backlight; Setting The Beeper; Setting The Startup Page - Bushnell ONIX 110 Instruction Manual

Fig. 79
Fig. 80
42
Setting the Backlight (cont.)
setting (Fig. 78) .
7. Use the up/down navigation keys to highlight √
and press OK.

Setting the Beeper

You can set the beeper on for keypad, warning
messages, or both.
To set the Beeper:
1. Press the Menu button twice to display the main
menu.
2. Select User Settings and press OK.
3. Select the Set 3 tab using the left/right navigation
keys.
4. Use the navigation keys to highlight the Beeper
option.
5. Press OK to display the available settings.
6. Use the up/down navigation keys to select a
setting (Fig. 79) .
7. Use the up/down navigation keys to highlight √
and press OK.

Setting the Startup Page

You can choose to display or hide the startup page
when turning on the ONIX 110.
To enable/disable the startup page:
1. Press the Menu button twice to display the main
menu.
2. Select User Settings and press OK.
3. Select the Set 3 tab using the left/right navigation
key.
4. Use the up/down navigation keys to highlight
the Startup Page option.
5. Press OK to display the available settings.
6. Use the up/down navigation keys to select On
or Off (Fig. 80) .