Using Trails; Creating A Trail Log 26~26 - Bushnell ONIX 110 Instruction Manual

Bushnell gps navigator instruction manual
Table of Contents

Advertisement

modify the routes as required:
• Select Edit to modify the chosen route.
• Select Delete to delete the chosen route
• Select Delete All to delete all routes.
• Select Set NAV to activate navigation mode.
• Select Cancel NAV to disable navigation mode.

Using Trails

In the My Trails menu, you can configure trail settings,
change the trail type, and view the trail information.
Creating a Trail Log
The ONIX 110 also features a trail function that records
information about your trip to help you follow the
same trail in the future.
To create a trail:
1. In Advanced mode, press the Menu button to
display the menu options.
2. Highlight the My Trails option and press OK (Fig.
33) .
3. Under the My Trails tab use the navigation keys
to highlight the Trail field and press OK to display
the drop down menus.
4. Select from the following options:
• Select Off to disable logging of the trail.
• Select Fill to save trails with no more than 2500
trail points.
• Select Wrap to create trails in a cyclical manner.
After a trail log with 2500 track points is saved,
new trail points are saved by overwriting the old
trail points starting from 0.
•Select Continue (Fig. 34) to create a single
continuous trail log of all trail points. You can
save up to 8 continuous trail logs.
5. Press the Menu button to view the trail log menu
and select from the following options:
Fig. 33
Fig. 34
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

36-1100

Table of Contents