Resetting To Factory Defaults; Viewing Device Information - Bushnell ONIX 110 Instruction Manual

Fig. 82
Fig. 83
Fig. 84
44
Making a Cold Start (cont.)
the previous, obsolete data from the memory.
The Cold Start feature enables you to restart
navigation by acquiring fresh positioning information
from the available satellites as follows:
1. Press the Menu button twice to display the main
menu.
2. Scroll to the Cold Start option and press OK
(Fig. 82) . The device starts acquiring fresh satellite
information.

Resetting to Factory Defaults

If unusual characters or random code, etc. appears on
the screen, restore all settings to the factory defaults
to acquire fresh information from the satellites and
clear the previous, obsolete data from the memory.
To reset all settings to factory defaults:
1. Press the Menu button twice to display the main
menu.
2. Scroll to Satellite and press OK to enter the
satellite page.
3. Press and hold Menu and OK buttons for three
seconds. A warning message appears to confirm
resetting to factory defaults (Fig. 83) .
4. Press OK to confirm.

Viewing Device Information

To view information about the device's Firmware:
1. Press the Menu button twice to display the main
menu.
2. Scroll to the Unit Info option and press OK.
3. The screen displays the device information and
the free memory available for trail logs, routes, and
waypoints (Fig. 84) .