Operating - Walinga Central-Vac Operator And Parts Manual

4.6

OPERATING

1. Read and understand the Operator's Manual
and all safety signs before using.
2. Before servicing, adjusting, repairing or
maintaining unit, ensure that unit power
source is completely shut down, and can not
start-up.
3. Do not operate when any guards are dam-
aged or removed. Install and secure guards
before starting.
4. Lock out tag out master panel before open-
ing airlock access door.
5. Keep hands, feet, clothing and hair away
from all moving and/or rotating parts.
6. Clear the area of all bystanders, especially
small children, before starting.
When operating the Central
Vacuum System, follow this
procedure:
1. Clear the area of bystanders,
especially small children,
before starting.
2. Review and follow the Pre-
Operation Checklist (See
Section 4.4).
3. Attach the components
required to pick up the dust or
granular material as appropri-
ate for your application:
a. Attach hose to cam lock
coupler.
OPERATING SAFETY
7. Ground all lines, hoses and wands to prevent
static build-up and electrical discharge/
shocks.
8. Maintain electrical continuity between
material intake and airlock/blower to prevent
sparks, shocks, or electrical discharge.
9. Wear appropriate ear protection when
operating for long periods of time.
10. Do not place intake nozzle near feet when
standing on the top of material.
11. Review safety items with all personnel
annually.
Fig. 4- 3 CAM LOCK COUPLER
21