Servicing Intervals - Walinga Central-Vac Operator And Parts Manual

5.1.3

SERVICING INTERVALS

8 Hours or Daily
1. Open the flapper valve on
the bottom of the filter
canister to remove the
loose material.
2. Remove the bottom cone and
check the condition of the input
filter. Clean or change as
required.
3. Check the tension and alignment of the input
drive belts. See Maintenance Section.
WARNING
Machine is shown with guard removed
for illustrative purposes only. Do not
operate machine with guard removed.
INPUT FILTER
FLAPPER VALVE
Fig. 5-1
Fig. 5-2 DRIVE BELTS (ALIGNMENT)
31