Safety Sign Locations - Walinga Central-Vac Operator And Parts Manual

3

SAFETY SIGN LOCATIONS

The types of safety signs and locations on the equipment are shown in the illustration below. Good safety
requires that you familiarize yourself with the various safety signs, the type of warning and the area, or
particular function related to that area, that requires your SAFETY AWARENESS.
• Think SAFETY! Work SAFELY!
Fig. 3-1
A
1. Read Operator's Manual before starting.
2. Before servicing, adjusting, repairing or
maintaining unit, ensure that unit power
source is completely shut down, and can not
start up.
3. Install and secure all shields before operating.
4. Keep hands, feet, hair and clothing away from
moving parts.
5. Clear the area of bystanders, especially small
children, before starting.
7. Wear hearing protection for prolonged expo-
sure to excessive noise.
8. Review safety instructions annually.
REMEMBER - If safety signs have been damaged, removed, become illegible or parts replaced without
signs, new signs must be applied. New signs are available from your authorized dealer or factory direct.
CAUTION
A B
A
B
ROTATING PART HAZARD
To prevent serious injury or death from
rotating parts:
1. Close and secure guard before operat-
ing.
2. Before servicing, adjusting, repairing
or maintaining unit, ensure that unit
power source is completely shut down
and can not start up.
3. Keep hands, feet, hair and clothing
away from moving parts.
WARNING
53-18288-6