Filling Soluble Hoppers - Bunn Crescendo Installation & Operating Manual

DRIP TRAY, BREW GROUP AND
BEAN HOPPER (
continued)
5. Connect brew chamber outlet tube.
6. Slide red lock to right until it locks.
7. Connect water inlet tube.
8. Remove the bean hopper from the parts box and install
in top of machine.
9. Align the bean hopper so that the collar on the bottom of
the bean hopper will engage the opening in the grinder.
10. When the hopper is in place on the grinder, pull the
hopper gate all the way forward to allow beans into the
grinder, then lock hopper in place.

FILLING SOLUBLE HOPPERS

1. Remove packing material from on top of the
powder hoppers.
2. Remove powder hoppers by lifting the front of the powder
hopper until the peg on the bottom of the hopper clears
the hole in the mounting plate.
INITIAL SETUP
5
6
7
8
10
1
2
6
9