Bunn Crescendo Installation & Operating Manual page 26

►
SEPARATING BREW CHAMBER PARTS
1
1. Slide cake pusher forward.
2. Pull sieve head out from brew
chamber.
►
CLEANING BREW CHAMBER PARTS
1
1. Brush espresso drive gears.
4
4. Use lukewarm water only to rinse
all parts.
7
7. Place all parts out to dry.
3
2
3. Remove cake pusher.
2
2. Brush sieve head.
NOTE: Pay special attention to
the channels.
5
5. Clean all sides of brew chamber.
NOTE: Turn gears in back of brew
chamber to clean all sections.
CLEANING
26
4
4. Remove sieve head.
3
3. Use brush to clean brew chamber
housing and gear channels.
6
Cake Pusher Sieve Head
6. Clean cake pusher and sieve
head in warm water.
continued >
Gear
Channels