Port A Input Select
Sets the input connector that is skipped
when changing the input signal by
pressing the PORTA button. Set to
"Not Skip" or "Skip" for the SDI, DVI
D, HD15, VIDEO, S-VIDEO input
connector.
Port B Input Select
Sets the input connector that is skipped
when changing the input signal by
pressing the PORT B button. Set to "Not
Skip" or "Skip" for the SDI, DVI-D,
HD15, VIDEO, S-VIDEO input
connector.
Input Name
Sets the name for each input connector.
Set the name of the SDI, DVI-D, HD 15,
VIDEO, S-VIDEO input connector.
• Endoscope
• Laparoscope
• Ultrasound
• Recorder
• Printer
• PACS
• C-arm
• Room Camera
• Surgical Camera
• Microscope
• Vital Device
Power Supply
When the 5 V output power of the DVI
input connector is output, "On" is set.
When the power is not output, "Off' is
set.
-E] Input Configuration menu
[Pooi7C::-:::J, ··- �
�E::::J�
jso,
�tSkip
jo \1-0
NotSk.ip
!H015
No1S1<ip
j1.1oeo
No1Sl<lp
js"10EO
NotSkip
Submenu
Setting
261
Adjustment Using the Menus
►
HDCP Setting
Sets the HDCP setting for signals input
in the DVI-D-E) connector.
• Enable: Sets to use the signals
protected with HDCP.
Disable: Sets to use the signals not
protected with HDCP. When
"Disable" is set for the signals not
protected with HDCP, signals are
output from the DVI-D G-
connector.
When "Disable" is set for the signals
protected with HDCP 1 ), images are not
displayed.
1) HDCP (High-bandwidth Digital
Content Protection) is a copyright
protection technology using
encryption technology of digital
video signals.
Auto Input Select
Sets the auto detection of the input
signal.
Select from among "Off, " "On. "
• On: Inputting signals to the input
connector automatically changes
connectors.
• Off: The Auto Input Select function
does not operate.
About Auto Input Select
• When "Auto Input Select" is set to
"On" and there is no input signal to
any connector, inputting a signal to
one of the connectors detects the
signal and displays it on the screen.
• When a signal is input to one of the
connectors, the "Auto Input Select"
function does not operate even if a
signal is input to another connector.
• When "Skip" is set for the signal
input connector, the signal is
displayed on the screen.
• When using a multi-image di
the detected signal is displayed on
the main display.
• If a signal is detected while
displaying the menu, the menu will
be hidden.
Submenu
Setting
l@M
l@M
lay,
sp