Download Print this page

LAVOR Pro TEKNA Series Instruction Manual page 12

Advertisement

Available languages

Available languages

-
If an extension lead is used, the plug and
socket must be watertight and the cable
must have the dimensions shown in the
table below.
230-240V
3G 2,5 mm
2
max 20 m
PLEASE NOTE: This water cleaner is equipped
with the A.S.S. (Automatic Stop System), which
stops the machine during the bypass phase. To
start the water cleaner, it is therefore necessary
to set the switch on position "ON"; after that
press the pistol trigger: the Automatic Stop
System will start the machine and will stop it
automatically when the trigger is released. It is
advisable to put on the safety of the pistol trig-
ger whenever the machine is stopped, in order
to avoid unintentional starting.
OFF position.
18
>
The performances of the machine are suitable
400-415V
for a professional use. Structural technologies
have been studied to assure high reliability and
4G 2,5 mm
2
safety levels, and long life. It is absolutely for-
bidden to use the machine in potentially explo-
max 30 m
sive environments or areas.
The working temperature must range between
+ 5° and + 50°C. It is forbidden to carry out any
modification to the structure and to any ele-
ments of the machine.
CORRECT USE OF THE MACHINE
surface and must be horizontal.
lation and gas venting must be assured.
users are urged to hold the gun in the correct
position, with one hand on the grip and the
other on the spray rod.
electrical cables or at the machine.
-
>
Take out the upper and the lower hooks, which
-
fix the cardboard box to the pallet, take the card-
board box off, put two wheels of the machine
on ground and take the pallet off (see ref. 2).
>
1
ST
START-UP
When starting up for the first time or after a
long period out of use, connect the intake line
-
only for a few minutes so that any dirt is vented
from the delivery outlet.
ELECTRICAL CONNECTION (Ref. 3)
Check that the mains voltage is the same as
that of your machine, indicated on the techni-
-
cal data plate. Your electrical system must be
constructed by qualified technicians capable of
working in accordance with the requirements
of the regulations in force (earth connection,
SUITABLE USE OF THE MACHINE
UNPACKING
INSTALLATION AND START-UP
EN
-

Advertisement

loading