Power; Printer - Gateway 200STM User Manual

Chapter 17: Troubleshooting

Power

Your computer is not working on AC power
Make sure your AC power adapter is connected correctly to your
computer. For more information, see "Connecting the AC adapter" on
page 24.
If your system is plugged into a surge protector, make sure the surge
protector is securely connected to an electrical outlet, switched on, and
working correctly. To test the outlet, plug a working device, such as a
lamp, into the outlet and turn it on.
Make sure the AC power adapter cables are free from cuts or damage.
Replace any damaged cables.
Your computer is not working on battery power
Make sure the battery is installed correctly. For more information, see
"Changing batteries" on page 131.
Make sure the battery is fully recharged. For more information, see
"Recharging the battery" on page 129.
Make sure the battery is calibrated correctly. For more information, see
"Recalibrating the battery" on page 130.

Printer

The printer will not turn on
Make sure the power cable is plugged into an AC power source.
The printer is on but will not print
Check the cable between the printer and the computer. Make sure it is
connected to the proper port.
Most printers have an online/offline button that you may need to press
so the printer can start printing. Press the button to put the printer
online.
Check the connector and cable for bent or broken pins.
If the printer you want to print to is not the default printer, make sure
you have selected it in the printer setup.
276 www.gateway.com