Gateway 200STM User Manual page 197

5
Click the
General
6
If you are using a DHCP server, click
- OR -
If you are not using a DHCP server, click
type the IP address in the
box.
mask
Important If you are required to type an IP Address and Subnet Mask,
ask your network system administrator for the correct
values.
7
Click to close the Internet Protocol (TCP/IP) Properties dialog box.
OK
8
Click to close the Wireless Network Connection Properties dialog box.
OK
9
Click to close the Network Connections window.
X
tab.
box and Subnet mask in the
IP address
www.gateway.com
Using a wireless network
Obtain an IP address automatically
Use the following IP address
.
, then
Subnet
191