Draining The Tank - Ultrawave ARGON Operator's Instruction Manual

Draining the tank

The tank is drained via the drain outlet located on the one of the tank sides or bottom.
Drain valve – open
Drain valve – close
Step 1 – Ensure that the drain is either directly over a drain or is connected to a tube,
which is placed into a drain.
Step 2 – Turn the tap until it is in its open position.
Step 3 – Allow the liquid to drain.
Step 4 – Close the tap when the tank is completely drained
Step 5 – Wipe the inside of the tank to remove debris and/or residual fluid.
If there is a weir fitted inside the tank there will be a separate drain valve for this, follow
the same instructions as "draining the tank".
10