Ultrawave ARGON Operator's Instruction Manual page 10

If the unit is a dryer type the cycle will run but the cycle time will not start it's
countdown until the 'Set Temp' is reached at which point it will start it's preset 'Cycle
Rem'. This cycle will also appear if the fluid temperature is below the minimum
temperature. During this 'warm-up' period the screen will show a 'Heating' message:
The cycle can be aborted at any time by the operator, by pressing the 'enter' button
(under 'Cancel'), the screen will show a 'Operator' message in place of 'Running' and the
screen will return to the initial user screen.
See below for an explanation of a Dryer cycle:
8