Installation Of The Crank - Shimano DURA-ACE FC-R9100 Dealer's Manual

INSTALLATION

Installation of the crank

„ Installation of the crank
1
(A)
2
(B)
(B)
3
(A)
To be continued on next page
Fully insert the right crank arm unit until
it touches the bottom bracket.
Set the wide groove area of the left
crank arm into the axle of the right
crank arm unit where the groove is wide.
(C)
Use the SHIMANO original tool to
tighten the cap.
(C)
17
(A)
Wide groove area (left crank arm)
(B)
Wide groove area (axle)
(C)
Apply grease
Premium grease (Y04110000)
(A)
TL-FC16/FC18
(B)
Cap
(C)
Apply grease
Premium grease (Y04110000)
Tightening torque
0.7 - 1.5 N·m