Installation Of The Crank - Shimano DURA-ACE FC-R9100 Dealer's Manual

INSTALLATION

Installation of the crank

„ Installation of the crank
1
(A)
2
(B)
(B)
3
(A)
To be continued on next page
Insert the right crank arm unit.
Set the wide groove area of the left
crank arm into the axle of the right
crank arm unit where the groove is wide.
(C)
Use the Shimano original tool to tighten
the cap.
(C)
17
(A)
Wide groove area (left crank arm)
(B)
Wide groove area (axle)
(C)
Applying grease
Premium grease (Y-04110000)
(A)
TL-FC16/FC18
(B)
Cap
(C)
Applying grease
Premium grease (Y-04110000)
Tightening torque
0.7 - 1.5 N·m