Time Setting; General Operation - N'oveen HC2100 LCD User Manual

OPERATION INSTRUCTION
1. Before inserting the plug into an electrical outlet, make sure that the electrical supply in
your area matches that on the rating label on the unit.
2. Carefully remove the heater from the plastic bag and the carton.
3. Place the heater on a firm level surface ,setting the master button to "-"position. Plug the
cord set into a AC220-240V~ electrical outlet, with "BEE" sounds the "Power" light is on and
the heater will shows the default temperature, it will twinkle 5 seconds.

1) TIME SETTING

Before turning on the heater, set the time as right time. Press "
control, LED display shows 00:00 and "Mo" lights on.
HOUR Press "Set" button one time, LED displays "
to set the Hours from 01—00 (01=1 o'clock, 02=2 o'clock...00=24 o'clock)
MINUTE Press "Set" button again, LED displays "00:
set the minutes from 00—59 (01=1 Minute, 02=2 Minute etc.)
WEEK Press "Set" button again, "Mo" light twinkles,press "
from Mo--Su (Mo=Monday...Su=Sunday etc.)
PS:Press "Set" button, screen shows number that will twinkle for 5 seconds, you should
operate in time, otherwise appliance will get back to standby.
(Appliance will keep the right time until power off)

2) GENERAL OPERATION

1. Turn the heater ON by pressing the ON/OFF main button, the unit will blow the cold air
and " " light is on.
2. Press the "MODE" button, the unit will blow the warm air and both "
are on.
3. Press the "MODE" button second time, the unit will blow the hot air and both "
lights are on.
4. Press the "MODE" button third time, the unit will blow the cold air and "Fan/M" light is on.
PS:On control panel "
th
HOT AIR; 4 time: SWING FUNCTION; 5
" button, press 1
st
time: COOL AIR; 2
th
time: OFF.
" button on remote
00
:00" twinkling, press"
" twinkling, press "
00
buttons to set the week
nd
time: WARM AIR; 3
buttons
buttons to
" and " " lights
" " "
rd
time:
14