Setting The Timer - N'oveen PTC05 Instruction Manual

OPERATING INSTRUCTIONS

SETTING THE TIMER

Heater has a built-in timer that will automatically turn the unit off after a set amount of time.
1. While heater is plugged and turned on, press the 'Timer Button' to
activate timer.
2. Repeatedly press 'Timer Button" to set number of hours before
heater turns off. You can choose between 1-12 hours.
3. Once desired hours have been chosen, stop pressing 'Timer
Button' to set.
4 To cancel timer, turn the heater off.
Note: Healer has an automatic 12 Hours default timer feature.
1. Plug the heater into desired power outlet.
2. Press On/Off switch to On position to turn on the healer.
3. Select desired fan speed. Press "Fan Speed Button' to choose
between High speed (HH) or Low speed (LL) on Digital Display.
4. Select desired temperature. Use the "+" button to raise temperature
or "-" button to lower the temperature between 15 - 32 °C Digital
Display.
5. When finished, press "On/Off Switch' to Off position and unplug
heater from power outlet. Store in a cool, dry place until next use.
9