Delay Function; Child Lock Function; Control Panel - N'oveen HC2100 LCD User Manual

model. (In this function, the appliance is checking environment temperature. It will stop
working, when the environment temperature drops ≧3 ℃. The user should restart the
appliance with "ON/OFF" button)
3. Press " " button again, the "

7) DELAY FUNCTION

1. This function can be used in when:
- the appliance is in the standby state.
- before the appliance working.
- this function only works through remote control.
2. Press " " button, the LED light is on display, then press "
"Delay" light and "I/W" light are on. Press "
o'clock, 24=24 o'clock...00=off)
---------------------------------------------------------This is open time
3. Press " " button again, the "Delay" light and "II/H" light are on. Press "
Hours from 01--24 (01=1 o'clock, 24=24 o'clock...00=off)
---------------------------------------------------------This is close time
PS: Press " " button, screen shows number that will twinkle for 5 seconds, you should
operate in this time, otherwise appliance will get back to standby. (This function is one-time
and must be reset after the power is cut off.)
8) CHILD-LOCK FUNCTION
1. This function works only through remote control. When appliance is plugged in, this
function can be used in any mode.
2. Press " " button one time, all lights and LED display are closed, only "Power" light is
on. In this condition, both control panel and remote control are inactive.
3. Press " " button again, all lights are on and control panel and remote control are
active.

CONTROL PANEL

" light is off. Window Open Function is off.
" to set the Hours from 01-24 (01=1
" button one time, the
" to set the
17