Advertisement
Quick Links
BT5965
CEILING MOUNT
with THREADED NPT ADAPTOR
INSTALLATION GUIDE
SPECIFICATIONS
• Ceiling mounts accessories such as dome security
cameras using a 1.5" NPT adaptor
• Max load: 70kg (154lbs)
• Available in two Ø38mm pole lengths:
BT5965-FD100 pole length 1000mm
BT5965-FD200 pole length 2000mm
• Integrated cable management
www.btechavmounts.com
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for BTECH BT5965
Summary of Contents for BTECH BT5965
- Page 1 SPECIFICATIONS • Ceiling mounts accessories such as dome security cameras using a 1.5” NPT adaptor • Max load: 70kg (154lbs) • Available in two Ø38mm pole lengths: BT5965-FD100 pole length 1000mm BT5965-FD200 pole length 2000mm • Integrated cable management www.btechavmounts.com...
-
Page 2: Installation Safety Instructions
CONTENTS Installation Safety Notes........................Parts List..............................Installation Instructions........................Product Dimensions..........................B-Tech Contact Details........................INSTALLATION SAFETY INSTRUCTIONS CAUTION: This mount is intended for use only with the maximum weights indicated. Use with equipment heavier than the maximum indicated may result in instability causing possible injury. Do not attempt to install this product until all instructions and warnings have been read and properly understood. - Page 4 BT5965 PARTS LIST PLEASE KEEP THIS FOR FUTURE REFERENCE...
-
Page 5: Installation Tools Required
DESCRIPTION ITEM CEILING PLATE M8 x 10mm HEX SCREW M6 x 5mm HEX GRUB SCREW Ø38mm POLE CEILING COVER PLATE NPT ADAPTOR 3AF HEX KEY 5AF HEX KEY Suitable for loads up to 70kg INSTALLATION TOOLS REQUIRED Pencil Drill... -
Page 6: Installation Instructions
INSTALLATION INSTRUCTIONS MOUNT CEILING PLATE TO CEILING i. Pre-drill holes for ceiling fixings (not supplied). ii. Assemble two fixing screws on opposite sides, leaving a 10mm gap between the screw head and ceiling. iii. Hook item 1 onto the fixing screws and twist into position. Leave 10mm gap to hook on ceiling plate CEILING... - Page 7 FIX POLE TO CEILING PLATE i. Insert item 4 into item 1 and secure in place with item 2. Note: Align ceiling plate hole with the hole on the pole. ii. Tighten item 3, fixing item 4 to item 1. iii.
- Page 8 CONNECT ADAPTOR TO POLE TO i. Attach item 6 to item 4, aligning the fixing holes on the pole and the adaptor. Note: Ensure the pole goes into the non-threaded end of the adaptor. ii. Fasten item 2 into item 6. Align Note: Ensure all grub screws Holes...
-
Page 9: Typical Installation
MOUNT CAMERA TO ADAPTOR i. Fix the camera onto item 6 and fully tighten. Note: Ensure item 3 does not exceed the inner thread BOTTOM VIEW CAMERA ii. Tighten item 3 on the bottom of item 7, securing the camera to the adaptor. TYPICAL INSTALLATION CAMERA... - Page 10 BT5965 DIMENSIONS PLEASE KEEP THIS FOR FUTURE REFERENCE 101.5mm CEILING MOUNT 68mm 120mm 92mm 128.4mm 8.5mm 8.5mm 30° 17mm 30° 8.5mm 30° NPT ADAPTOR 1.5" NPT THREAD 54mm THESE INSTRUCTIONS ARE INTENDED AS A GUIDE ONLY AND B-TECH ACCEPTS NO...
- Page 11 BT5965 DIMENSIONS PLEASE KEEP THIS FOR FUTURE REFERENCE 128.4mm 30mm 44mm 38.1mm THESE INSTRUCTIONS ARE INTENDED AS A GUIDE ONLY AND B-TECH ACCEPTS NO LIABILITY FOR THE ACCURACY OF THE INFORMATION CONTAINED IN THIS DOCUMENT.
- Page 12 B-Tech AV Mounts is a division of B-Tech International Design and Manufacturing Ltd. B-Tech AV Mounts and the B-Tech logo are registered trade marks. All other brands and product names are trademarks of their respective owners. Photographs are for illustrative purposes only. E&OE. AMA-BT5965-V1.1-0821-110 MADE IN VIETNAM For More Information Visit www.btechavmounts.com...
Need help?
Do you have a question about the BT5965 and is the answer not in the manual?
Questions and answers