Advertisement
BT8577
Bolt-Down Pole Mounted Digital Signage Stand
With Retractable Base
Installation Guide
Sliding floor base, retracts the display stand backwards
■
- Ideal for shop fronts, close-to-the-window installations
Recommended for screens up to: 75" (190cm)
■
Max load: 40kg (88lbs)
■
Suitable for displays with VESA
■
up to 600 x 400mm
Universal design suitable for displaying screens in a
■
landscape or portrait orientation
Base dimensions: W.262mm (10") D.420-826mm (17" - 33")
■
Max. distance from the floor to centre of the screen:
■
1630mm (64")
& non-VESA fixings
®
www.btechavmounts.com
Max
Recommended
Max Screen
Load
75"
40kg
190cm
[88lbs]
Max
Post Install
VESA
Alignment
600
x
400
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for BTECH BT8577
Summary of Contents for BTECH BT8577
- Page 1 BT8577 Bolt-Down Pole Mounted Digital Signage Stand With Retractable Base Installation Guide Sliding floor base, retracts the display stand backwards ■ - Ideal for shop fronts, close-to-the-window installations Recommended for screens up to: 75" (190cm) ■ Max load: 40kg (88lbs) ■...
-
Page 2: Installation Safety Instructions
BT8577 Contents Installation Safety Notes Parts List Installation Instructions Product Dimensions B-Tech Contact Details Installation Safety Instructions Caution: This mount is intended for use only with the maximum weights indicated. Use with equipment heavier than the maximum indicated may result in instability causing possible injury. - Page 3 B-Tech AV Mounts 建议本产品由专业AV安装人员或其他合格人员安装。 B-Tech AV Mounts 及它的代理商、经销商不对由于 不恰当的安装而造成的损失或伤害负责。 本产品必须安装在合适的架构上，并仅用于不超过所标示的最大承重。 Společnost B-Tech AV Mounts doporučuje provést instalaci tohoto produktu instalátora AV či jinak způsobilé osoby. Společnost B-Tech AV Mounts, její distributoři a prodejci nenesou prostřednictvím odborného odpov ědnost za škody nebo zranění...
- Page 4 BT8577 Parts List Please keep this for future reference...
-
Page 5: Installation Tools Required
Item Description Retractable Base Cover Plate 1.6m Pole M16 x 50mm Screw M16 Washer 10AF Hex Key Mounting Plate Interface Arm 600m Adaptor Arm M8 x 12mm Screw Collar Collar Cover M8 x 12mm Screw M8 Washer M8 Grub Screw M6 x 20mm Grub Screw Handle M8 x 15mm Handle Screw... -
Page 6: Installation Instructions
Installation Instructions Pre-Drill Holes In Floor Use the base as a template to mark fixing holes in the floor and drill fixing holes inserting suitable floor anchors (not supplied)*. 460.05mm 18.11in 419.55mm 16.52in *M10 Anchors recommended 341mm 13.43in 113.67mm 4.48in 113.67mm 4.48in 113.67mm 4.48in 40mm 1.57in... - Page 7 Assemble Pole To Base i. Attach item 17 to item 1 using item 18. ii. Stick item 20 onto the bottom of item 2 and place on the top of item 1 aligning the holes. Note: Place tape away from edges. iii.
- Page 8 Bolt Stand Down Use the pre-installed floor anchors to fix base (item 1) to the floor. Floor Fixings Cable Gudie Note: Use these floor fixings to Floor (Front) fit the Cable Gudie to item 1. Pliers Optional: Cable management. Breakaway to allow external cable routing. Optional: Use item 19 to lock the base and Cable prevent the stand from being retracted.
- Page 9 Fit Mounting Plate Onto Stand i. Attach item 11 to item 7 using item 13 & 14. Note: Ensure grub screws (item 15) are positioned on the back of the collars (item 11). Grub Screws ii. Slide item 11 onto item 3 and position to preferred height.
- Page 10 Fix Interface Arms To Screen For screens with universal fixings up to 455 x 400mm Fix items 8 to the back of the screen using the screen fixing kit (items A-J). Note: Ensure items 8 are positioned the correct way round and the same holes are used on both arms.
-
Page 11: Installation Options
Installation Options Mounting An AV Device Position the AV equipment on item 7 so the cables have easy connection to the screen and use cable ties to secure the device to the mounting plate (item 7). Recommended AV equipment size: Depth up to 20mm (0.8") Height up to 100mm (4") If necessary use spacers with item 8... - Page 12 Optional Screen Adjustment If necessary, level the screen with the height adjustment screws at the top of item 8. Screen Height Adjustment Screw Lock Screen Onto Mounting Plate Lock screen onto item 7 using the safety screws on the bottom of item 8. Screen Safety Screw...
- Page 13 Screen Servicing Storage Area Warning! Avoid pulling the stand back by the top of the pole.
- Page 14 BT8577 Dimensions Please keep this for future reference Top View Back View 600mm 23.6in 620mm 24.4in 8.4mm 0.3in 6.4mm 0.3in 400mm 15.7i Ø50.8mm 2in Bottom View 600mm 23.6in 25mm 1in 157.6mm 6.2in 11mm 0.4in 262mm 10.3in Ø50.8mm 2in...
- Page 15 39mm 1.5in 8.4mm 0.3in 39mm 1.5in 6.4mm 0.3in 8.4mm 0.3in 6.4mm 0.3in 30.5mm 1.2in 30.5mm 1.2in 25mm 1in 25mm 39mm 1.5in 8.4mm 0.3in 6.4mm 0.3in Front View 30.5mm 1.2in 400mm 15.7in 400mm 15.7in 400mm 15.7in Side View 826mm 32.5in 419.6mm 16.5in 826mm 32.5in 419.6mm 16.5in 866.5mm 34.1in...
- Page 16 BT8577 Contact: info@btechavmounts.com ©2024 B-Tech AV Mounts Corporation Ltd. All rights reserved. B-Tech AV Mounts is a division of B-Tech AV Mounts Corporation Ltd. B-Tech AV Mounts and the B-Tech logo are registered trademarks. All B-Tech images and symbols are exclusive property of B-Tech AV Mounts Corporation Ltd.
Need help?
Do you have a question about the BT8577 and is the answer not in the manual?
Questions and answers