Advertisement
Quick Links
BT8331
UNIVERSAL POP-OUT
MENU BOARD MOUNTING SYSTEM
INSTALLATION GUIDE
SPECIFICATIONS
• Recommended screen size: 39"- 70"
• Max weight per screen: 50kg (110lbs)
• Features pop-in, pop-out function to allow access to the rear of
screens for servicing and maintenance and to aid installation
• Tool-less micro-adjustments for seamless display alignment
• Suitable for landscape or portrait mounting
• Sections can be joined together to increase menu board width
• Safety screws help prevent unauthorised removal of screens
• All mounting hardware included
Note: This assembly manual covers di erent installations. Some
parts or procedures shown may not be required for installation.
Please refer to page 4
for VESA® xings
www.btechavmounts.com
TM
PER SCREEN
Advertisement
Related Manuals for BTECH BT8331
Summary of Contents for BTECH BT8331
- Page 1 BT8331 UNIVERSAL POP-OUT MENU BOARD MOUNTING SYSTEM INSTALLATION GUIDE SPECIFICATIONS • Recommended screen size: 39”- 70" • Max weight per screen: 50kg (110lbs) • Features pop-in, pop-out function to allow access to the rear of screens for servicing and maintenance and to aid installation •...
- Page 2 CONTENTS Installation Safety Notes........................Parts List..............................Typical Installation..........................Recess Mounting............................ Installation Instructions........................Product Dimensions..........................B-Tech Contact Details........................INSTALLATION & OPERATING SAFETY INSTRUCTIONS CAUTION: This mount is intended for use only with the maximum weights indicated. Use with equipment heavier than the maximum indicated may result in instability causing possible injury.
- Page 4 BT8331 PARTS LIST RAIL MOUNTING BRACKET PLEASE KEEP THIS FOR FUTURE REFERENCE BT8390-WFK1 Due to the multiple installations available the quantity for each option below is dependent on the mount ordered. MOUNTING RAIL BT8390-070 BT8390-050 BT8390-150 Length: 70cm Length: 50cm...
- Page 5 ITEM PART NAME PER PACK BT8390-WFK1 WALL FIXING PLATE ST8 x 45mm CSK WOOD SCREW No.10 WALL PLUG M8 SLIDING NUT M8 x 12mm CSK SCREW 5AF HEX KEY MOUNTING RAIL MOUNTING RAIL END CAP RAIL EXTENSION KIT (OPTIONAL) JOINING BAR M6 x 8mm GRUB SCREW 3AF HEX KEY SCREEN INTERFACE ARMS...
- Page 6 TYPICAL INSTALLATION 2 x 1 Menu Board Installation with VESA 400 Micro-Adjustment Pop-Out Arms RECESS MOUNTING Note: Dimensions are based on using the BT8390-VESA400MAP with a BT8390 rail and BT8390-WFK1. Depth dimensions may change if di erent brackets are used. *Note: Add 6mm to depth if adaptor arms (item 20) are used.
- Page 7 OPTIONAL EXTENDING THE mounting rail COMBINING MOUNTING RAILS i. On one side of item 7, insert 4x item 9 half-way into each channel. ii On the back side of item 7, insert 1x item 9 in the second channel and 1 x item 9 in the third channel - See Fig. 1 iii.
- Page 8 INSTALLATION INSTRUCTIONS ASSEMBLE WALL PLATES TO MOUNTING RAIL i. For each item 1 used insert 2x item 4 into item 7. 1 in the top channel and 1 in the bottom channel.
- Page 9 ii. Attach item 1 to item 7 by fastening item 5 into item 4. Required quantity of Wall Plates (item 1) 2pcs for up to 2000mm (0 - 79") 3pcs for 2100mm - 3500mm (80" - 139") 4pcs for 3600mm - 6000mm (140" - 239") 5pcs for 6100mm - 8000mm (240"...
- Page 10 FIX MOUNTING RAIL TO THE WALL Keyhole mounting i. Mark and drill two xing holes for each wall plate assembled. ii. Insert item 2 into the top hole, do not fully tighten - allow a gap (approx.10mm) to hook on item 1. 10mm (0.4") WALL (approx)
- Page 11 ATTACH INTERFACE ARMS TO SCREEN Fix items 12 & 13 to the rear of the screen using items A-J. Note: Ensure the arms are facing the correct way round and the same holes are used on both arms. SCREEN RECESS SCREEN Use spacers (items H, I &...
- Page 12 CONNECT INTERFACE ARMS WITH THE ADJUSTABLE BRACE Note: Adjustable brace (item 14) is only suitable for horizontal VESA xings from 400 - 600mm. i. Extend item 14 and x at desired length by tightening the 2 screws. Note: The 3 notches show the position for interface xings at 400mm, 500mm and 600mm. For screens with interface holes 600mm apart, extend item 14 to the 600 settting.
- Page 13 HOOK SCREEN ONTO RAIL Using items 12 & 13, hook the rst screen centrally onto item 7. WALL WALL ALIGN FIRST SCREEN i. Lateral Adjustment Slide arms along item 7 to laterally adjust screen to desired position. SCREEN Lateral Adjustment...
- Page 14 ii. Height Adjustment (+/-20mm) Ensure the screen is level and parallel to oor using the height adjustment hand wheels on the interface arms. LEVEL SCREEN FLOOR HEIGHT ADJUSTMENT HAND WHEEL Compatible with a 6mm hex key (not supplied) Height adjustment guides to help with accurate screen alignment Do not adjust height...
- Page 15 iii. Depth Adjustment (+/-10mm) Ensure the screen corners are equidistant from the wall using the depth adjustment hand wheels on the interface arms. Distance to wall WALL SCREEN Distance to wall Depth adjustment guides to help with accurate screen alignment Do not adjust depth past the min and max guide lines...
- Page 16 ADD REMAINING SCREENS TO THE MENU BOARD Hook on remaining screens. Use the micro-adjustments to ensure screens are aligned (see Step 6). During installation, pop screens out for easy access to adjustment hand wheels (see Step 9). Use Height Adjustment to align bottom/top of screens WALL SCREENS...
- Page 17 SERVICING SCREENS Note: Ensure pop-out function is not disabled (see Step 10). Push centrally at the left and right of the screen to pop-out the mount. The screen will rest in the 'open' position for servicing. After servicing, push screen back and click into original position. WARNING! Be careful not to damage screen when pushing.
- Page 18 BT8331 DIMENSIONS PLEASE KEEP THIS FOR FUTURE REFERENCE ASSEMBLED SIDE VIEW WALL FIXING KIT BT8390-VESA400MAP 45mm BT8390-WFK1 6 x Ø 8.4mm 2 x Ø 8.4mm Centre of 24mm BT8390 Rail BT8390 Rail Distance from wall 105.4mm FRONT VIEW REAR VIEW...
- Page 19 BT8331 DIMENSIONS Depending on installation requirements, the BT8331 Menu Board Mounting Kit will feature a selection of the following products. PLEASE KEEP THIS FOR FUTURE REFERENCE MOUNTING RAILS BT8390-050 BT8390-070 700mm 500mm 705mm 505mm BT8390-150 1500mm 1505mm BT8390-175 1750mm 1755mm...
- Page 20 All other brands and product names are trademarks of their respective owners. Photographs are for illustrative purposes only. E&OE. Manufactured by: B-Tech International Ltd Bennett House, Long March, Daventry, Northamptonshire, NN11 4NR, UK B-Tech Pro-AV BVBA Brixtonlaan 32, Zaventem 1930, Brussels, Belgium AMA-BT8331-V1.2-0721-BTECH MADE IN VIETNAM For More Information Visit www.btechavmounts.com...
Need help?
Do you have a question about the BT8331 and is the answer not in the manual?
Questions and answers