Nanoe™ X Setting - Panasonic CZ-RWS3 Operating Instructions Manual

4. Press /
• Every time you press
(Swing) ↔
5. Press .
• You can return to Step 2 to continue setting if you press
.
Note
• Press to stop operation in the middle.
nanoe™ X Setting
1. Press during operation.
nanoeX
• You can toggle between ON and
OFF each time you press
• " " is displayed when this
setting is ON.
• When the nanoe™ X setting is
ON, "nanoe" (atomised water
particle) is released from the
indoor unit while in operation
(Cool, Dry, Heat, Fan, Auto).
• If the receiver emits 1 short beep
followed by 1 long beep after
pressing
nanoeX
does not support this function.
See page 30 for how to enable
or disable the button.
• " " is displayed if the function is not available.
to select the flap direction, then press
/
↔ ↔ ↔
.
nanoeX
, the indoor unit
, it cycles from "
↔ ".
1
.
(Unlock) ↔
instead of
(EN)
21