Brainz 38526 Instruction Manual

EN
BRAINZ BLUETOOTH SPEAKER &
WIRELESS CHARGER
INSTRUCTION MANUAL
PLEASE READ ALL INSTRUCTIONS CAREFULLY AND
RETAIN FOR FUTURE USE

What you need

- USB Cable (included)
- AUX Cable (optional, included)
- USB Adaptor (not included)
- Mobile phone or other Bluetooth enabled device (not included)

How to charge

Connect the supplied cable to the speaker and plug the USB side into a power source. A red light on the speaker
will start to glow. This indicates the speaker is charging. The speaker is fully charged when the light on the speaker
turns off.

How to set it up

Turn on the speaker by sliding the 'On-Off' button to 'On'. The speaker will appear under your new Bluetooth
connections on your phone as BRAINZ Speaker S20. By clicking on it, your phone will connect to the speaker and
it will be ready for use.

AUX

If you wish to use the supplied AUX cable, plug one end into your phone and the other end into the speakers 'LIN'
port. The speaker will now switch to AUX and will automatically disable Bluetooth.

Wireless charging

To charge your mobile phone or tablet (with QI technology) place it on top of the speaker.
Please note
For wireless charging, the speaker must be connected to a power source.

Turning off

You can turn the speaker off by sliding the 'On-Off' button to 'Off'.
This manual applies to article number 38526.
For more information about this product, please visit www.brainz-electronics.nl