Brainz NOX Instruction Manual

BRAINZ SOLAR SPEAKER NOX GREEN
PLEASE READ THE INSTRUCTIONS CAREFULLY
What you need
•
USB-C Cable (included)
•
USB Adapter or USB Power Supply (not included)
•
Bluetooth-enabled mobile phone, tablet or laptop (not included)
•
TF/SD Card, USB (optional, not included)
How to charge the speaker
1. Place the speaker in a sunny spot with the solar panel facing the sun and the speaker will charge.
2. Connect the supplied cable to the speaker and plug the USB side into a power source. The speaker
charges when you see a red light on. When the speaker is fully charged, the lamp will stop lighting up.
How to set up the device
Make sure the speaker is fully charged before using it. Turn on the speaker by pressing and holding the power
button for 3 seconds. The speaker will appear under new Bluetooth connections on your device as 'BRAINZ S135'.
Clicking on this will connect your phone and the speaker will be ready to use. The speaker will let you know if your
phone is connected by a sound.
Volume
To turn up the volume, press the + button. To decrease the volume, press the - button.
Pausing music
Briefly click the pause button to pause the music. Repeat to resume music.
Next/previous song
To go to the previous song, briefly click the - button. To go to the next song, briefly click the + button.
Switching modes
Briefly click the 'M' button to switch between Bluetooth, radio, USB or TF/SD.
Radio
Place the speaker where a signal can be received and slide out the antenna. Click the 'M' button until you get to
radio mode. Press and hold the pause button to connect to a channel.
USB
The USB port allows you to play your own music. Insert a USB stick into the speaker's dedicated access port.
TF/SD
It is possible to play music using your own SD card. Insert your SD card into the 'TF' port.
Change LED illumination
Press and hold the 'M' button for 2 seconds to switch off LED lighting. Repeat to turn it on again.
Switch off
To turn the speaker off, flip the slider.
Phone holder
Caution:
Do not use a charger with a higher voltage than suitable for this product.
For more information about this product, please visit
INSTRUCTION MANUAL
AND KEEP THEM FOR FUTURE REFERENCE
This manual is valid for article number 38622.
EN
www.brainz-electronics.nl