Advertisement
Available languages
Available languages
Quick Links
What you need
•
USB-C Cable (included)
•
Mobile device with Bluetooth
•
TF/SD Card, USB (optional, not included)
How to charge the speaker
Connect the included cable to the speaker and plug the USB side into a power source. The speaker
is charging when you see a red light on. When the speaker is fully charged, the red light will turn off.
How to set up the device
Make sure the speaker is fully charged before using it. Turn on the speaker by clicking the 'power' button. The speaker
will appear under the new Bluetooth connections on your device as 'BRAINZ S160'. Clicking on this will connect your
device and the speaker will be ready to use. The speaker will let you know if your device is connected by a sound.
Volume
Press and hold the up arrow to increase the volume. To turn down the volume, press and hold the down arrow.
Pause music
Briefly click the button with the arrow icon to pause the music. Repeat to resume music.
Next/previous song
To go to the previous song, briefly click the down arrow. To go to the next song, briefly click up arrow.
Switching modes
Briefly click the M button to switch between Bluetooth, USB or TF/SD.
USB
The USB port allows you to play your own music. Insert a USB stick into the speaker's dedicated access port.
TF/SD
It is possible to play music using your own SD card. Insert your SD card into the 'TF' port.
Change LED lighting
Click the button with the light icon to change LED lighting. Press and hold this button for 3 seconds to switch off the LED
lighting.
Connecting speakers with each other
If you have two Rox Speakers, you can pair them for an even better sound experience. Turn on both speakers and make
sure one of them is connected with a Bluetooth connection. Then, on both speakers, click the button on the top left. The
speakers will now connect to each other and play the same music. Click the same button to disconnect the speakers
from each other.
Turn off
Click the 'power' button to turn off the speaker.
Caution:
Do not use a charger with a higher voltage than suitable for this product.
For more information about this product, please visit
BRAINZ SPEAKER ROX BLACK
INSTRUCTION MANUAL
PLEASE READ THE INSTRUCTIONS CAREFULLY
AND KEEP THEM FOR FUTURE REFERENCE
This manual is valid for article number 38634.
EN
www.brainz-electronics.nl
Advertisement
Related Manuals for Brainz ROX
Summary of Contents for Brainz ROX
- Page 1 Connecting speakers with each other If you have two Rox Speakers, you can pair them for an even better sound experience. Turn on both speakers and make sure one of them is connected with a Bluetooth connection. Then, on both speakers, click the button on the top left. The speakers will now connect to each other and play the same music.
- Page 2 Speakers met elkaar verbinden Indien u twee Rox Speakers heeft, kunt u deze koppelen voor een nog betere geluidservaring. Zet beide speakers aan en zorg ervoor dat één van deze speakers verbonden is met een Bluetooth verbinding. Vervolgens klikt u op beide speaker op de knop linksboven.
Need help?
Do you have a question about the ROX and is the answer not in the manual?
Questions and answers