Cleaning And Maintenance; Accessories And Replacement Parts - Beurer BM 81 easyLock Instructions For Use Manual

PM ashes on the display.
The average value of the evening measurements for the last 7 days is displayed
(evening: 6.00 p.m. – 08.00 p.m.).
• When you press the memory button M again, the last individual measurement
is displayed (in this example, measurement 03).
• When the memory button M is pressed again, you can view your individual measured values.
• To switch the device o again, press the Start/stop button
You can exit the menu at any time by pressing the Start/stop button
• In order to delete all saved measurements from a user, rst select it as described.
• A ashes on the display and the average value of all saved measured values in this user memory is
displayed.
• Press and hold both setting buttons
• CL 00 appears on the display. All the values in the current user memory are
deleted. Das Gerät schaltet sich im Anschluss automatisch ab.

8. Cleaning and maintenance

• C lean the device and cu carefully using a slightly damp cloth only.
• Do not use any cleaning agents or solvents.
• Under no circumstances hold the device and cu under water, as this can cause liquid to enter and dam
age the device and cu .
• If you store the device and cu , do not place heavy objects on the device and cu . Remove the batteries.
The cu line should not be bent sharply .

9. Accessories and replacement parts

Accessories and replacement parts are available from the corresponding service address (according to the
service address list). Please state the corresponding order number.
Designation
easyLock- Universal cu (24-40 cm)
+ and -
Item number and/or order number
164.290
or wait 30 sec.
.
-