Advertisement
Item No.
62-573
62-571
62-574
62-572
62-573
62-574
QUICK START GUIDE
Phase 1 - Preparation
1.1 Remove Headrests.
q
1.2 Raise seat up, slide forward and lean back forward.
q
Phase 2 - Installation
2.1 Install Seat Back Cover
q
2.2 Install Seat Bottom Cover.
q
2.3 Install Headrest Cover.
q
General care instructions:
1. In most cases dirt, debris, spills and pet hair can be removed by wiping with a
damp cloth.
2. Seat covers can be removed and machine washed on low temperature setting
using mild detergent.
Drip dry or machine tumble dry on a no heat cycle.
Straps should be coiled and secured with rubber bands for machine washing
and drying.
3. Soil may be removed with spray cleaner or detergent and water.
4. Oil or grease stains should first be treated with a dry cleaning solvent followed
by a spray cleaner or detergent and water.
5. Do not use bleach.
For technical support, contact us at 1-800-565-5321
BILL OF MATERIALS
Description
Seat Back Cover Passenger Side
Seat Bottom Cover Passenger Side
Headrest Cover Passenger Side
Seat Back Cover Driver Side
Seat Bottom Cover Driver Side
Headrest Cover Driver Side
.
Qty.
1
1
1
1
1
1
6257-19 Installation Guide | REV. A1 | Page 2
Advertisement
