Table of Contents
Advertisement
2. Basic Operation
2.4 Remaining Battery Level
Display
6
7
8
2.4.1 Battery Level Indicator
When the remaining battery level becomes lower than 6V, the display screen
will start blinking.
Please note that the reading when the screen is blinking cannot be
guaranteed.
* Once the voltage of Ni-Cd battery becomes 6.5V or lower, the voltage
will decrease at a rapid pace. Charge the batteries ahead of time.
* Using backlight drains battery quickly. Please use the backlight only
when necessary.
www.lazodecontrol.com
Key
This feature is available only on the monitoring screen or
when the instrument is ready for a measurement in the
measurement mode (when "ready" is displayed). On other
screens this feature cannot be used.
BATT
Press BATT key.
★ The remaining battery capacity level will be displayed for 2
9
Procedure
seconds. Then the screen will go back to the original screen
automatically.
remaining battery capacity level
6
7
8
9
*
Voltage for a new dry cell battery is 9V.
*
Voltage for a fully charged Ni-Cd battery is about 8.5V.
+51 960 810 089
Voltage (V)
Change the batteries when
the screen starts blinking.
blinking
When the remaining battery
capacity level becomes lower:
ventas@lazodecontrol.com
11
Advertisement
Table of Contents
